User Manual
Table Of Contents
- CAMERA OPERATION MANUAL
- How to use this manual
- Composition of the manual
- Contents
- Names of parts
- 1 Getting started
- 2 Using the menus
- 3 Shooting basics
- 4 Flash
- 5 Advanced shooting
- A/S/M mode
- Aperture priority shooting
- Shutter priority shooting
- Manual shooting
- Using My Mode
- Focusing applications
- Metering
- AE LOCK - Locking the exposure
- Macro mode shooting
- Super macro mode shooting
- Self-timer shooting
- Remote control shooting
- Sequential shooting
- PANORAMA - Panorama shooting
- 2 IN 1 - Taking two-in-one pictures
- FUNCTION - Adding special effects to pictures
- Recording sound with still pictures
- Recording sound with movies
- Using commercially available external microphones
- 6 Adjusting the image quality and exposure
- 7 Playback
- 8 Useful functions
- ALL RESET - Saving the camera’s settings
- CUSTOM BUTTON
- SHORT CUT
- MY MODE SETUP
- CARD SETUP - Formatting cards
- Information display
- Monitor/viewfinder brightness adjustment
- REC VIEW
- SLEEP - Sleep Timer
- Beep
- SHUTTER SOUND
- VOLUME - Playback volume
- POWER ON/OFF SETUP - Power on/off display/sound setting
- SCREEN SETUP
- FILE NAME
- PIXEL MAPPING
- Measurement units
- VIDEO OUT - Video output selection
- 9 Print setting (DPOF)
- 10 Direct printing (PictBridge)
- 11 Miscellaneous
- DIGITAL CAMERA - PC CONNECTION OPERATION MANUAL

64
Flash shooting
4
Flash
zAuto-flash (No indication)
The flash fires automatically in low light or backlight conditions.
zRed-eye reduction flash (!)
The light from the flash may make the subject’s eyes appear red in the
picture. The red-eye reduction flash mode significantly reduces this
phenomenon by emitting pre-flashes before firing the regular flash. This helps
accustom the subject’s eyes to the bright light and minimizes the red-eye
phenomenon.
• After the pre-flashes, it takes about 1 second before the shutter is
released. Hold the camera firmly to avoid camera movement.
• Effectiveness may be limited if the subject is not looking directly at
the pre-flashes, or if the shooting range is too far. Individual physical
characteristics may also limit effectiveness.
zFill-in flash (#)
The flash fires regardless of the available light. This mode is useful for
eliminating shadows on the subject’s face (such as shadows from tree
leaves), in a backlight situation, or for correcting the color shift produced by
artificial lighting (especially fluorescent light).
• The fill-in flash may not have the desired effect under excessively
bright light.
The subject’s eyes appear red.
Note
Note