User Manual
Table Of Contents
- CAMERA OPERATION MANUAL
- How to use this manual
- Composition of the manual
- Contents
- Names of parts
- 1 Getting started
- 2 Using the menus
- 3 Shooting basics
- 4 Flash
- 5 Advanced shooting
- A/S/M mode
- Aperture priority shooting
- Shutter priority shooting
- Manual shooting
- Using My Mode
- Focusing applications
- Metering
- AE LOCK - Locking the exposure
- Macro mode shooting
- Super macro mode shooting
- Self-timer shooting
- Remote control shooting
- Sequential shooting
- PANORAMA - Panorama shooting
- 2 IN 1 - Taking two-in-one pictures
- FUNCTION - Adding special effects to pictures
- Recording sound with still pictures
- Recording sound with movies
- Using commercially available external microphones
- 6 Adjusting the image quality and exposure
- 7 Playback
- 8 Useful functions
- ALL RESET - Saving the camera’s settings
- CUSTOM BUTTON
- SHORT CUT
- MY MODE SETUP
- CARD SETUP - Formatting cards
- Information display
- Monitor/viewfinder brightness adjustment
- REC VIEW
- SLEEP - Sleep Timer
- Beep
- SHUTTER SOUND
- VOLUME - Playback volume
- POWER ON/OFF SETUP - Power on/off display/sound setting
- SCREEN SETUP
- FILE NAME
- PIXEL MAPPING
- Measurement units
- VIDEO OUT - Video output selection
- 9 Print setting (DPOF)
- 10 Direct printing (PictBridge)
- 11 Miscellaneous
- DIGITAL CAMERA - PC CONNECTION OPERATION MANUAL
86
Metering
5
Advanced shooting
MULTI METERING
1 When using the camera in the
A/S/M mode, multi-metering is not
available in the M mode. Set to any
mode except M.
g“A/S/M mode” (P.73)
• If a function other than AE lock is
registered on x, set AE lock to the
button.
g“Setting the custom button” (P.150)
2 In the top menu, select ESP/5 Æ MULTI, and press e.
• In the top menu, the setting can be made in the same way as selecting
MODE MENU Æ CAMERA Æ ESP/5 Æ MULTI.
g“How to use the menus” (P.35)
•Press e again to exit the menu.
3 Position the AF target mark on the
area you want to meter and press
x. The brightness is metered
at up to 8 different points.
• Multi-metering bar appears.
• Brightness meter readings are ignored
after the 9th reading.
• To perform metering again, press
x for more than 1 second to display C. Press x again
to cancel the metering values.
Arrow pad
OK button
x
AE Lock/ Custom button