Manual

30 EN
Menu operations
All existing data, including protected pictures, are erased when the internal memory or card is
formatted. Make sure that you save or transfer important data to a computer before formatting the
internal memory or card.
• Make sure there is no card inserted in the camera when formatting the internal memory.
• When the internal memory is formatted, the data of the frames and labels downloaded with the
provided OLYMPUS Master software will be deleted.
• Be sure that the card is inserted in the camera when formatting the card.
• Before using non-Olympus cards or cards which have been formatted on a computer, you must format
them with this camera.
Insert the optional card into the camera. Copying data does not erase the picture in the internal memory.
• It takes some time to back up data. Check if the battery is not empty before starting the copy, or use
the AC adapter.
You can select a language for on-screen display. Available languages vary depending on the area
where you purchased this camera.
You can add other languages to your camera with the provided OLYMPUS Master software.
When this is set to [ON], pressing
< while in shooting mode displays the last picture taken on the
monitor. (The same operation can be performed as in playback mode.)
[VOLUME] can not be adjusted when:
• [SCREEN] is set to [OFF].
• [SILENT MODE] is set to [ON].
• [MUSEUM] is activated.
Still pictures in the internal memory or the card can be registered to screen [2] for [PW ON SETUP].
If a picture is already registered, the [IMAGE EXISTING] screen is displayed asking if you want to
cancel the currently registered picture and register a new one.
MEMORY FORMAT (FORMAT) ................................... Formatting the internal memory or card
BACKUP ................................................. Copying pictures in the internal memory to the card
W............................................................................................... Selecting a display language
QUICK VIEW ......................Setting to allow you to view pictures immediately after shooting
OFF /ON
PW ON SETUP ............................................................. Setting the startup screen and volume
SCREEN OFF (No picture is displayed.) / 1 / 2 (The picture registered with
[SCREEN SETUP] is displayed.)
VOLUME OFF (No sound) / LOW / HIGH
SCREEN SETUP .................................................. Registering a picture as the startup screen
COLOR ............................................................................ Setting the color of the menu screens
NORMAL /BLUE /BLACK / PINK
BEEP ......................................... Adjusting the volume of the beep when buttons are pressed
OFF (No sound) / LOW / HIGH
d4314_15_e.book Page 30 Friday, July 14, 2006 2:47 PM