User Manual

141

PIXEL MAPPING – Checking the image

Useful functions

• When the File No. reaches 9999, the file number returns to 0001

and the folder number changes.

• When both the Folder and File No. reach their respective maximum

number (999/9999), the number of storable pictures becomes 0

even if the card is not full. No more pictures can be taken. Replace

the card with a new one.

The Pixel Mapping feature allows the camera to check and adjust the CCD

and image processing functions. It is not necessary to operate this function

frequently. Approximately once a year is recommended. Wait a few minutes

or more after the monitor is used or continuous shots are taken to allow for

proper performance of the Pixel Mapping function.

1 In the top menu, select MODE

MENU Æ SETUP Æ PIXEL

MAPPING, and press d.

g“How to use the menus” (P.33)

• START appears.

2 Press e.

• The BUSY bar is displayed during Pixel

Mapping. When Pixel Mapping is finished,

the screen returns to the mode menu.

• If you accidentally turn the camera off during Pixel Mapping, start

again from Step 1.

Note

PIXEL MAPPING

–

Checking the image

Mode dial

Arrow pad

OK button

Note