User Manual

Setting the date and time

Getting started

6 Press ac to select one of the

following date formats: Y-M-D (Year/

Month/Day), M-D-Y (Month/Day/

Year), D-M-Y (Day/Month/Year).

Then press d.

• Move to the year setting.

• The following steps show the procedure

used when the date and time settings are

set to Y-M-D.

7 Press ac to set the year, then

press d to move to the month

setting.

• To move back to the previous setting,

press b.

• The first two digits of the year are fixed.

8 Repeat this procedure until the date

and time are completely set.

• The time is displayed in the 24-hour format.

Consequently, 2 p.m. is displayed as 14:00.

9 Press e.

• For a more accurate setting, press e

when the time signal hits 00 seconds.

10 To turn the camera off, set the

power switch to OFF.

• The date and time settings will be canceled if the camera is left

without a battery for approximately 6 days. The settings will be

canceled more quickly if the battery was only loaded in the camera

for a short time before being removed. Check that the correct date

and time have been set before shooting.

Y M D

SELECt

SEt

SELECt

SEt

Power switch

e button

Note