User Manual

56
4
Flash
4 Flash
Flash shooting
Select the flash mode best suited to the light conditions and the effect you
want to achieve. You can also adjust the amount of light emitted using the
flash intensity control. You can also use an optional flash.
1 Set the flash mode by repeatedly
pressing #.
• The flash mode changes in the sequence
shown below (when all modes are
available).
• The selected mode is set automatically, and if no operation is
performed for about 3 seconds, the mode selector is exited.
Mode dial
Power switch
Shutter button
Mode dial
#button
Auto-flash !Red-eye reduction flash #Fill-in flash
$Flash off #SLOW Slow synchronization
SLOW