Reference Manual

153
10
Miscellaneous
Troubleshooting
 When the camera is connected to a PC or Printer.
The camera is not recognized by the PC.
The USB driver has not
been installed.
PC was selected on the
monitor after connecting to
the printer with a USB
cable.
The printer does not
support PictBridge.
It is necessary to install the USB
driver for Windows 98/98SE. For
how to install, see “DIGITAL
CAMERA-PC CONNECTION
OPERATION MANUAL” on the
CD-ROM.
Disconnect the USB cable from
the camera and start again from
the beginning.
Refer to the printer's instruction
manual or contact the
manufacturer.
—
P. 130
—
Possible cause Corrective action Ref. Page
The camera is not recognized by the printer.