Reference Manual

22
1
Getting started
Power on/off
• The camera automatically enters the sleep mode* to save power
when the power is left on and no operations are performed. The
camera activates again as soon as you operate any button. Sleep
time interval can be set.
~ P. 122
* In the playback mode, the camera always turns off if no operation is
performed for 3 minutes regardless of the sleep mode setting.
• The power lamp stays lit in the following cases:
– When the camera is connected to a computer.
– When the camera is in the sleep mode.
• When closing the lens barrier, do not push the lens barrier against
the lens. Forcing the lens barrier may damage the camera body or
cause a malfunction.
Note
Startup/Shutdown screen
You can select whether to display the startup/shutdown screen or adjust the
sound volume when the power is turned on/off.
~ “PW ON/OFF SETUP – Power on/off display/sound volume setting”
(P.120)