Reference Manual

25
1
Getting started
Date/time setting
5
Press to move to the year setting.
6
Press to set the year. When the
year is set, press to move to the month
setting.
● Repeat this procedure until the date and
time are completely set.
● To move back to the previous setting, press
.
● The camera can only display the time in
“number of hours”, or what is commonly
known as military time. Consequently, 2 p.m.
would be 14:00 hours, or 12:00 hours + 2:00
hours =14:00 hours.
● The first two digits of the year cannot be
changed.
7
Press .
● For a more accurate setting, press when
the clock hits 00 seconds. The clock starts
when you press the button.
8
To turn the camera off, close the lens
barrier.
SELECT
SET
GO
2004. 01. 01
SELECT
SET
GO
2004. 01. 01
• The current settings remain the same even when the power is turned
off, unless they are readjusted.
• The date setting will return to the factory default setting if the camera
is left with no battery for approximately one day. If this happens, you
will need to set the date again. The setting will be canceled more
quickly if the battery was only loaded in the camera for a short time
before being removed.
Note