Operation Manual

Connecting the camera to a computer

146

Connecting the camera to a computer

2 Plug the other end of the

USB cable into the

camera’s multi-connector.

• The monitor turns on and the

selection screen for the USB

connection is displayed.

3 Select [PC] and press e.

• If the selection screen

disappears, press the POWER switch to turn

the camera on again or disconnect the USB

cable and repeat the procedure from Step 2.

4 The camera is recognized by the computer.

• Windows 98SE/Me/2000

When you connect the camera to your computer for the first time, the

computer attempts to recognize the camera. Click “OK” to exit the message

that is displayed. The camera is recognized as a “Removable Disk”.

•Windows XP

When the camera is connected to the computer, the screen for selecting an

image file operation is displayed. As OLYMPUS Master will be used to

download images, click “Cancel”.

•Mac OS X

The iPhoto program is the default application for managing digital images.

When you connect your digital camera for the first time, the iPhoto application

starts automatically, so close this application and start OLYMPUS Master.

Note

• The camera functions are disabled while the camera is connected to a

computer.

Multi-connector

Connector cover

USB

SELECT GO

P C

EXIT