Operation Manual

190
Troubleshooting
11
Miscellaneous
Playback of recorded images
Possible cause Corrective action Ref. page
The picture is out of focus.
A subject unsuited to
AF was taken.
Use manual focus or focus lock to focus on the
subject and then shoot.
P.50, 68
The camera moved
when the shutter
button was pressed.
Hold the camera correctly and press the shutter
button gently.
P. 31
The flash was closed
in a lighting condition
requiring use of the
flash.
Press the flash button to make the flash pop up.
Camera movement occurs easily with slower
shutter speeds. Use a tripod, or set the flash to
AUTO.
P. 57
The lens was dirty. Clean the lens. Use a commercially available
blower blush and then wipe with a lens cleaner to
remove dust. Mold may form on the lens surface
if the lens is left dirty.
P. 20 6
The picture is too bright.
The flash was set to
the fill-in flash mode.
Select a flash mode other than fill-in flash. P.57
The center of the
subject is too dark.
If the center of the subject is too dark, the
surrounding area emerges as too bright. Adjust
the exposure compensation toward minus (–).
P. 10 2
The ISO is at a high
setting.
Set the ISO to AUTO or to a low sensitivity: 64 P.101
The aperture value is
small in A (M) mode.
Increase the aperture value or set the camera to
P mode.
P. 66
The shutter speed
setting is too slow in S
(M) mode.
Increase the shutter speed or set the camera to P
mode.
P. 67