Operation Manual

Setting the date and time

Getting started

6 Press ac to select one of the

following date formats: Y-M-D

(Year/Month/Day), M-D-Y (Month/

Day/Year), D-M-Y (Day/Month/Year).

Then press d.

• Move to the year setting.

• The following steps show the procedure

used when the date and time settings are

set to Y-M-D.

7 Press ac to set the year, then

press d to move to the month

setting.

• To move back to the previous setting,

press b.

• The first two digits of the year are fixed.

8 Repeat this procedure until the date and time are

completely set.

• The time is displayed in the 24-hour format. Consequently, 2 p.m. is

displayed as 14:00.

9 Press e.

• For a more accurate setting, press e

when the time signal hits 00 seconds.

10 To turn the camera off, press the

power switch.

• The date and time settings will be returned to the factory default

settings if the camera is left without the battery for approximately

one day. The settings will be canceled more quickly if the battery

was only loaded in the camera for a short time before being

removed. Before taking important pictures, check that the date and

time settings are correct.

Y M D

SELECt

SEt

2004

SELECt

SEt

Power switch

e button

Note