User's Manual
Table Of Contents
- CAMERA OPERATION
- INDEX
- Contents
- Getting started
- Shooting basics
- Advanced shooting
- Using the self-timer
- Shooting pictures sequentially (Sequential shooting)
- Varying the image brightness (Exposure compensation)
- Selecting the metering area (Spot metering)
- Adjusting the color tone (White balance)
- Selecting the image quality and size (Record mode)
- Panorama shooting
- Taking two-in-one pictures
- Taking a picture of yourself (Self-portrait shooting)
- Playback
- Camera settings
- Print settings
- Troubleshooting
- Specifications
- Index
- CONNECTING THE CAMERA TO A PC
77
Camera settings
Viewing a picture immediately after shooting (Rec View)
You can view the picture you have just taken on the monitor for 3 seconds
while it is being recorded.
Rec View settings
ON : The picture being recorded is displayed on the monitor. This is useful for a brief
check of the picture you have just taken. Pressing the shutter button halfway
during Rec View lets you resume shooting immediately.
OFF : The picture just taken is not displayed. This is useful when you want to prepare for
your next shot while the previous picture is being recorded.
1
Display the top menu in the shooting mode.
• Open the lens barrier.
•Press .
2
Press to select MODE MENU.
3
Press to select the SETUP tab, then press .
4
Press to select REC VIEW,
then press .
5
Press to select ON.
Rec View is set.
To close the menu, press twice.
The Rec View setting remains even when the lens barrier is closed.