Reference Manual

50
3
Shooting basics
Using the flash
The flash does not fire in the movie record mode or during
Panorama shooting.
Note
Select the flash mode best suited to the light conditions and the effect you
want to achieve.
1 Open the lens barrier fully.
2 Press í ().
The current flash setting is displayed on the
monitor.
3 Press í again to set the flash mode.
Each time you press í, the flash mode changes
in the following sequence:
AUTO Red-eye reduction Fill-in
flash Flash off.
4 Press the shutter button halfway.
When the flash fires, the orange lamp lights steady.
5 Press the shutter button fully to take the picture.
Flash working range: 0.2 - 3.0 m (0.7 - 9.8 ft)
TIPS
The and orange lamp blink.
T The flash is charging. Wait until the orange lamp goes off.
í ()
P
HQ HQ
2048 x 1536
AUTO
Shutter button