User Guide

137
Special Effects ~ Function Shooting
“BLACK & WHITE” lets you shoot in black and white picture, while “SEPIA”
adds a sepia (brownish tint) to your image. “WHITE BOARD” lets you take a
picture and superimpose letters on a white board, while “BLACK BOARD”
does the same with a black board. When the Mode dial is set to , only
“BLACK & WHITE” and “SEPIA” are available.
1
Press .
● The Menu screen appears.
2
Press on the Arrow pad and
select "FUNCTION", then press .
3
Press and select an item
(see above), then press the OK
button.
●
If the OK button is pressed again,
the setting is stored and the Menu
screen disappears. The normal
screen comes back on.
4
Take a picture.
4
1
2, 3
BLACK&WHITE
SEPIA
WHTE BOARD
BLACK BOARD
OFF
[
4/5
]
F2.8 1/800 0.0 P
CARD
SETUP
FUNCTION
BLACK&WHITE
SEPIA
OFF
[
2/3
]
F2.8 1/800 0.0
MODE
SETUP
CARD
SETUP
FUNCTION
Still Picture Recording Menu
Movie Recording Menu
● When "WHITE BOARD" or "BLACK BOARD" is selected, the flash mode is
set to (flash override). (P. 107)
● Adjust the exposure if letters are not clearly recorded with “WHITE BOARD”
or “BLACK BOARD” selected. (P. 99)
● When “ALL RESET” is off (p.148), current settings are retained even when
the power is turned off.
● When the Mode dial is set to ,“WHITE BOARD” and “BLACK BOARD”
are turned off.
● White balance cannot be used.
Note: