User Guide

94
RECORDING—range/focus (Cont.)
Setting the focus manually — Manual focus
Use this function to focus manually.
1
Press the OK button.
● The focus mode selection menu
appears.
2
Press on the Arrow pad to
select MF.
● and the distance indicator
appear on the control panel.
3
Press to select the focal
length.
● The display will be magnified to
make focusing easier.
● When the distance indicator is
moved to less than 3.25 ft, the
display will switch to a shorter
distance (3-15/16" to 3.25 ft).
4
Press the OK button.
● The setting is stored and MF
appears in red.
● To cancel Manual focus, press the
OK button to display MF, then
press to select AF. Press the
OK button.
..
Focusing is not possible at ∞ :
● Although MF is displayed and the
distance indicator at the top of the bar,
focusing may not be possible at ∞.
When this occurs, press to reset
the display.
2, 3
1, 4
P F2.8 1/800 0.0
AF MF
16ft
10ft
6.5ft
2.6ft
Control panel
Manual focus
● When using the flash, shoot within the flash working range.
● Unless OFF is selected in All Reset, the setting will be canceled when the
power is turned off (p.148).
● The distances shown on the screen are for reference only.
● The picture may go out of focus when the Zoom lever is pressed in the
Manual focus mode.
Note: