Digital Camera Reference Manual

107
Using OLYMPUS Master
8
Connecting to a computer
Macintosh
• Data transfer is only guaranteed on a Mac when the camera is connected
to a computer equipped with a built-in USB port.
• Macintosh must have QuickTime 6 or later and Safali 1.0 or later installed.
• Be sure to remove the media (drag & drop onto the trash icon) before
performing the following operations. Failure to do so could result in
unstable computer operation and the need to reboot.
• Disconnect the cable connecting the camera to the computer
• Turn off the camera
• Open the camera’s battery compartment/card cover
OS Mac OS X (10.2 or later)
CPU Power PC G3 500MHz or later
RAM 128MB or more (at least 256MB is recommended)
Hard disk capacity 300MB or more
Connector USB port
Monitor 1024 × 768 pixels, 32,000 colors or more