Assembly Instructions

MULTIPLE PIECE FLAGPOLE INSTALLATION INSTRUCTIONS
FOR INTERNAL AND EXTERNAL HALYARD POLES
CAUTIONS:
The joints of the multi- piece flag pole were not designed to withstand the loading associated with
picking the pole up from the top. This may result in the top slip fit joint being bent. Care should be taken
to operate the crane smoothly since abrupt movement will cause impact loads which could damage the
joint assemblies.
Do not attempt to install or dismantle
products near electric hazards such as
power lines or transformers, including
residential feed lines. You can be
severely injured or killed should this
product come into contact with the
electric equipment. Be sure the
product is placed a distance equal to
the height of the structure from the
electrical equipment including any
overhead wires.
DISCLAIMER:
These are generic instructions provided by contractors who have had great success installing multiple
piece flag poles. Special features, product being used for other than intended purpose or unique
environmental conditions may require different procedures. These instructions are not all inclusive
and do not address many of the challenges and hazards that a contractor may face in the field.
Olympus Group, 12/2017 Page 4