Owner's Manual

16 En
En
2 Press the button.
The monitor shows the Camera menu.
3 Select [CAMERA] using the / buttons and press the
button.
4 Select [
] using the / buttons and press the button.
5 Adjust the exposure compensation setting using the
/ buttons
and press the
button.
Press [–] to darken image or [+] to brighten image.
The exposure compensation setting is now completed.
Press the
button again to exit the menu.
6 Take a picture.
Note
• The setting of exposure compensation returns to ±0.0 (default setting) when
the clear settings value is [RESET] and the lens barrier is closed. See “Clear
settings” ( p.27).
• When the exposure is corrected, the brightness of the image displayed on the
monitor also changes. However, the variation may be less noticeable when the
subject is dark. In this case, check the recorded image to confirm that
exposure is satisfactory.
Caution
• If the flash is used, the image brightness (exposure) may differ from the
intended brightness (exposure).
• The exposure compensation can not correct the image brightness if the
surroundings of the subject are extremely bright or dark.
SELF-TIMER
You can shoot images using the self-timer function. Fix the camera securely
on a tripod, etc., before shooting. The self-timer is useful for taking
commemorative pictures including the photographer.
1 Open the lens barrier.
The camera turns on in the Record mode.
2 Press the button.
The monitor shows the Camera menu.
3 Select [CAMERA] using the / buttons and press the button.
4 Select [DRIVE] using the
/ buttons and press the button.
5 Select [
SELF-TIMER] using the / buttons and press the
button.
The self-timer setting is now completed.
Press the
button again to exit the menu.
6 Press the shutter button.
The self-timer lamp on the front of the camera lights up for 10 seconds and
then blinks for 2 seconds, before the picture is taken.
1/Basic04_C2-E.65E 8/22/01, 5:42 PM16