Operating instructions

Note:

• The flash cannot be used in the Sequence mode.

• This mode can only be used in the SQ mode (automatically set).

• Since the shutter speed is set to 1/30 second or faster to prevent blurring

due to camera movement, the resulting picture may be darker than

expected.

• The Sequence mode will be canceled when the power is turned off.

• It will take approx. 10 seconds to record the pictures taken.

SEQUENCE MODE (cont.)

Press the OK button to save

the setting. Press again to

cancel the Menu.

• If the Menu button is pressed

before the OK button, the

setting and Menu mode will be

canceled.

• appears on the control

panel.

Take a picture.

• The maximum number of

pictures that can be taken is

about 10.

Control panel