Microcassette Recorder User Manual
122
4
EN
Connecting to your PC
Disconnecting from your PC
Windows
1 Click [ ] on the task bar
located at the lower-right corner
of the screen. Click [
Safely
remove USB Mass Storage Device
].
• The drive letter will differ depending
on the PC being used.
2 Confirm that the recorder LED
indicator light is gone before
disconnecting the USB cable.
• The LED indicator light will light up
(orange) in case of charging, however
you can still disconnect the USB cable
in such condition.
Macintosh
1 Move the drive icon for this
recorder that is appear on the
desktop to the garbage bin by
Drag & Drop it.
2 Confirm that the recorder LED
indicator light is gone before
disconnecting the USB cable.
• The LED indicator light will light up
(orange) in case of charging, however
you can still disconnect the USB cable
in such condition.
Notes
• NEVER disconnect the USB cable while the
L
ED indicator light is ashing. If you do,
the data will be destroyed.
•
W
hen the recorder is connected to a PC,
the power will be supplied from the USB
cable.
•
R
efer to the user’s manual for your PC
regarding the USB port on your PC.
• B
e sure that you connect the USB cable
either directly to the USB port on your PC.
• B
e sure to push the cable connector all the
way in. Otherwise, the recorder may not
operate properly.
•
C
ancel Hold mode.
Connecting to your PC