Microcassette Recorder User Manual

42
2
EN
• Stop recording and the file that was just
recorded will be played back.
Pause
While the recorder is during recording
mode, press the
REC button.
• The recorder will time out after 120
minutes when left in “Rec Pause”.
Re
sume Recording:
Press the REC button again.
• Recording will resume at the point of
interruption.
To quickly check on the recorded contents
While the recorder is during
recording mode, press the
`
OK
button.
Notes
• When a microSD card is inserted in the
r
ecorder, be sure to conrm the recording
media as either [Built-in] or [microSD] so
that there is no mistake (☞ P.77).
•
I
f the
REC button is pressed when a
function other than the record function is
specied, [C
a
nnot record in this folder]
is displayed. Select a folder from [Fo
lder
A] through [Fo
lder E] and start recording
again.
• T
o ensure recording from the beginning,
start speaking after you see the LED indicator
light on.
•
W
hen remaining recording time is less
than 60 seconds, the LED indicator light
starts ashing. When the recording time
is decreasing to 30 or 10 seconds, the light
ashes faster.
•
W
hen [Folder Full] appears, the recorder
will not be able to record anymore. Delete
any unnecessary les before recording any
further (☞
P
.61).
• Recorder will not be able to record
anymore when [Me
mory Full] appears.
Delete any unnecessary les before
recording any further (☞
P
.61).
• We recommend formatting the record
media in the recorder before recording
(☞
P
.97).
Recording
Recording