Operation Manual

3
```
Recording
To pause recording, press the REC (-) button while recording. To
resume the recording, press the REC (-) button again.
Insert batteries.
Getting started
1
2
`
Battery indicator:
If [
] is displayed on the screen, replace batteries as
soon as possible. If the battery level becomes too low,
[
] and [Battery Low] are displayed and then the
recorder automatically turns off.
Strap eyelet
• A strap is not supplied with this product.
Microphone sensitivity
Turn the microphone toward a sound
source to be recorded.
High
Highly sensitive mode
which can record
surrounding noises (
H
)
Low
Standard sensitivity (
L
)
a
b
c
d
e
f
g
• The recorder cannot record if [Memory Full] or [Maximum File Size
is reached] is displayed. Delete unnecessary les to free up some
space in memory.
• When the available recording time becomes less than 60 seconds,
the recording indicator starts ashing. The indicator ashes faster if
the available time decreases to 30 seconds and to 10 seconds.
Recording indicator lights while
recording.
a
Current date/
b
Recording mode indicator/
c
Microphone sensitivity indicator/
d
Total
number of recorded les for the date/
e
Current
le number/
f
Elapsed recording time/
g
Remaining recording time
• Be sure to remove the
protective lm on the display
before using this product.
To turn off the power:
While the recorder is in the
stop mode, slide the POWER
switch to OFF/HOLD.
Power save mode:
If no operations are performed
for more than 10 minutes when
the power is on, the display
automatically turns off and the
recorder enters the power save
mode. To exit the power save
mode, press any button.
HOLD:
If sliding the POWER swich to OFF/HOLD while the
recorder is in operation, all buttons and switches are
disabled without interrupting the current operations.
• The [Set Time & Date] screen appears when you use the
recorder for the rst time or when the recorder is turned
on after more than 30 minutes without power supply.
• If the time and date are not set, the time and date of
the default settings are recorded to les .
Turn on the power.
Slide the POWER switch to ON.
Protective film