Instruction Manual

43
4
Press the REC/SET button.
The current MANUAL AUTHOR ID appears
on the display with the first character
flashing.
5
Press the FF/+ or REW/– button to choose
characters.
Available characters are 0 to 9, A to Z, and space.
REC button: To input the selected
character and advance the input
position.
NEW button: Acts as a backspace.
ERASE button: To delete the flashing character.
INDEX button: Lets you insert one space.
6
After selecting or entering the Author ID, press
and hold the REC/SET button for more than 1
second* to make it the current Author ID.
* If you selected an Anthor ID from the list in step 3, press
the REC/SET button.
7
Press the STOP button to close the menu.
································································································
Notes
• An Author name must be of more than 3 and fewer than 17 characters.
• You must not use a space within the first four characters of a filename.
• You cannot change the Author ID of a file which you have already
recorded.
Setting Job Data