Operation Manual

22
Assigning Folder
Names
The three folders can each be assigned a name
of up to eight characters.
The recorder comes with the following preset
folder names: FOLDER A, FOLDER B,
FOLDER C.
1
Press the FOLDER/MENU button
for 1 second or longer.
The menu opens (→ P.27).
2
Press the FF/+ or REW/– button to
open the folder name setup screen
(FOLDER NAME).
3
Press the REC/SET button.
The folder name setup process begins.
4
Press the FF/+ or REW/– button to
choose the folder you want to
name.
5
Press the REC/SET button to
accept the chosen folder.
The first character of the chosen folder’s
name flashes.
6
Press the FF/+ or REW/– button to
choose characters.
Available characters are 0 to 9, A to Z, and
space.
REC button: To input the selected
character and advance the
input position.
NEW button: Acts as a backspace.
ERASE button: To delete the flashing
character.
INDEX button: Lets you insert one space.
7
When you have finished setting the
folder name, press the REC/SET
button for 1 second or longer.
This completes the folder naming
procedure.
8
Press the STOP button to close the
menu.
Notes
• The folder naming process ends automatically when
the eighth character is set.
• Folder names can be changed only if a SmartMedia
card is inserted.
• A SmartMedia card with a write-protect seal attached
to it cannot be changed.
• When a SmartMedia card is formatted, folder names
that you assigned will be reset to the initial names.
Assigning Folder Names