Advanced Manual

Advanced shooting modes

Selecting the right mode for shooting conditions

Display in the viewfinder when the shutter button is pressed halfway



TIPS

The shutter speed indication does not stop blinking after the aperture

value is changed

J If the shutter speed indication is blinking when set to a high speed, set the ISO

sensitivity to a lower value or use a commercially available ND filter (for adjusting

the amount of light). g“ISO k Setting the desired sensitivity to light” (P. 78)

J If the shutter speed indication is blinking when set to a lower speed, set the ISO

sensitivity to a higher value. g“ISO k Setting the desired sensitivity to

light” (P. 78)

To change the EV step interval:

J In the menu, set the EV step interval to 1/3 EV, 1/2 EV or 1 EV. g“EV

step” (P. 108)

To check the depth of field with the selected aperture value:

J Refer to “Preview function” (P. 38).

Overexposed when the shutter speed

indication is blinking. Increase the

aperture value (f-number).

Underexposed when the shutter speed

indication is blinking. Decrease the

aperture value (f-number).

Viewfinder

Shutter speed

Aperture value

confirmation

mark