Advanced Manual

36
Selecting the right mode for shooting conditions
2
Live view
It is possible to display the subject in the LCD monitor and check its
composition, or shoot while viewing an enlarged display on the LCD monitor.
Press the
u button.
• The subject is displayed on the LCD monitor. The display for shooting information
can be turned off by pressing the INFO button.
There are two modes in live view; A mode and B mode (MF lock). It is possible
to switch according to the shooting situation.
Press the A/B button to display the menu. Turn the control dial to select,
then press the i button.
Supported mode A mode B mode
Shooting modes (mode dial: i, l, &, j, /)
33
Shooting modes (P, A, S, M)
33
Scene mode (g)
3 k
Sequential shooting
33
Enlarged display
k 3
3: Supported k: Not supported
x Notes
• When using A mode, as accurate metering may not be obtained, close the
eyepiece shutter. During operation in A mode, settings will not be displayed in
the viewfinder.
• When using B mode, if there is a high-intensity light source within the screen,
the image may be displayed darker but will be recorded normally.
Shutter speed
Mode icon
A/B mode
Record mode
Aperture value
Card
Exposure compensation value
Number of storable
still pictures
u button
INFO button
A/B button
Target mark
s0003_e_advanced.book Page 36 Wednesday, December 28, 2005 2:33 PM