Advanced Manual

51
Flash shooting
Various shooting functions
3
Using the built-in flash
If you shoot a subject using a lens that is wider than 14 mm (equivalent to 28
mm on a 35 mm film camera), the light emitted by the flash may produce a
vignette effect. Whether or not vignetting occurs also depends on lens type
and shooting conditions (such as distance to the subject).
1 Press the #UP button to raise the
flash.
2 Press the shutter button halfway.
• The # (flash stand-by) mark lights when the
flash is ready to fire. If the mark is blinking,
the flash is charging. Wait until charging is
complete.
3 Press the shutter button all the way.
#UP button
Flash stand-by
mark
Viewfinder
s0003_e_advanced.book Page 51 Wednesday, December 28, 2005 2:33 PM