Basic manual

22
Specifications
En
 Flash
Synchronization : Synchronized with the camera at 1/180 sec. or less
Flash control mode : TTL-AUTO (TTL pre-flash mode), AUTO, MANUAL
External flash attachment : Hot shoe
 External connector
USB connector/AV connector (Multi-connector)
 Power supply
Battery : BLM-1 Li-ion Battery x1
 Dimensions/weight
Dimensions : 140 mm (W) x 87 mm (H) x 72 mm (D) (5.5" x 3.4" x
2.8") (excluding protrusions)
Weight : Approx. 550 g (1.2 Ib.) (without battery)
 Operating environment
Temperature : 0 - 40 °C (32°F - 104°F) (operation)/-20 - 60 °C (-4°F -
104°F) (storage)
Humidity : 30 - 90 % (operation)/10 - 90 % (storage)
Specifications
BLM-1 Li-ion battery
MODEL NO. : PS-BLM1
Product type : Rechargeable Lithium ion battery
Nominal voltage : DC 7.2 V
Nominal capacity : 1500 mAh
No. of charge and
discharge times : Approx. 500 times (vary with usage conditions)
Ambient temperature : 0 °C - 40 °C (charging)
-10 °C - 60 °C (operation)
-20 °C - 35 °C (storage)
Dimensions : Approx. 39 mm (W) x 55 mm (D) x 21.5 mm (H)
Weight : Approx. 75 g (without protection cap)
BCM-2 Li-ion charger
MODEL NO. : PS-BCM2
Rated input : AC 100 V - 240 V (50/60 Hz)
Rated output : DC 8.35 V. 400 mA
Charging time : Approx. 300 mins. (approx. 5 hrs.) (room temperature:
if using BLM-1)
Ambient temperature : 0 - 40 °C (32°F - 104°F) (operation)/-20 - 60 °C (-4°F -
104°F) (storage)
Dimensions : Approx. 62 mm (W) x 83 mm (D) x 26 mm (H)
Weight : Approx. 72 g (without AC cable)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR
OBLIGATION ON THE PART OF THE MANUFACTURER.
Battery/charger specifications
s003_En-Fr-Es-De.book Page 22 Tuesday, December 27, 2005 4:34 PM