User guide

101 EN
Menu functions (Custom menus)
7
t Lever Function
MENU c S [t Lever Function]
You can use the positioning of the lever to change the function of the dials and buttons.
Table of lever position and functions assigned to dial/buttons
Mode
When the lever position is set
to 1
When the lever position is set
to 2
Off The lever function is not used. The lever function is not used.
mode1
Dial functions are based on [Dial
Function] settings.
Front dial: ISO
Rear dial: White balance
mode2
Dial functions are based on [Dial
Function] settings.
Front dial: White balance
Rear dial: ISO
mode3
The R button and Fn2
button functions are based on
[RFunction] and [VFunction]
settings.
R button: ISO
Fn2 button: White balance
mode4
The R button and Fn2
button functions are based on
[RFunction] and [VFunction]
settings.
R button: White balance
Fn2 button: ISO
mode5
The AF modes assigned to the lever positions apply. When the lever
position is set to 2, the default setting is [MF].
Viewing camera images on TV
Use the separately sold cable with the camera to playback recorded images on your
TV. Connect the camera to an HD TV using an HDMI cable to view high-quality images
on a TV screen. When connecting devices using an AV cable, fi rst set the camera’s
[Video Out] settings (P. 92).
1
2
AV cable (sold separately: CB-AVC3)
(Connect to the TV video input jack
(yellow) and audio input jack (white).)
HDMI cable (sold separately: CB-HD1)
(Connect to the HDMI connector on the TV.)
Multi-connector
HDMI connector
(type D)
Type A