Instruction manual

103
EN
Information
11
Exposure warning display
If the optimum exposure cannot be obtained when pressing the shutter button halfway,
the display will blink on the monitor.
Shooting
mode
Warning display
example (blinking)
Status Action
P
60"60" F2.8F2.8
The subject is
too dark.
Increase the ISO sensitivity.
Use the ash.
40004000 F22F22
The subject is
too bright.
Decrease the ISO sensitivity.
Use a commercially available ND lter
(for adjusting the amount of light).
A
30"30" F5.6F5.6
The subject is
underexposed.
Decrease the aperture value.
Increase the ISO sensitivity.
40004000 F5.6F5.6
The subject is
overexposed.
Increase the aperture value.
Decrease the ISO sensitivity or use a
commercially available ND lter (for
adjusting the amount of light).
S
20002000 F2.8F2.8
The subject is
underexposed.
Set the shutter speed slower.
Increase the ISO sensitivity.
125125 F22F22
The subject is
overexposed.
Set the shutter speed faster.
Decrease the ISO sensitivity or use a
commercially available ND lter (for
adjusting the amount of light).
The aperture value at the moment when its indication blinks varies with the lens type and
focal length of the lens.
S0038_E_Print.indb 103S0038_E_Print.indb 103 2011/06/09 11:33:312011/06/09 11:33:31