Basic operations Things to know before shooting Selecting the right mode for shooting conditions Various shooting functions Focusing functions Exposure, image and color Playback Customizing the settings/functions of your camera Printing Transferring images to a computer Appendix Information Accessories z Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life.
How to use this manual This manual includes a table of contents, index and menu list to help you easily locate the information you need. Searching the table of contents g P. 4 All section titles and chapter headings are listed in the table of contents so that you can quickly find the information you need. There is a chapter containing information you need to know before using your camera for the first time, a chapter that describes basic shooting procedures, etc.
How to read the instruction pages Step through the menus in the order of (g P. 23). This represents the arrow pad. This represents the control dial. Shows alternative setting procedures. This sample page is only for your reference. It may differ from the actual page in this manual. Indications used in this manual Important information on factors which may lead to a malfunction or operational problems. Also warns of operations that should be absolutely avoided.
Table of Contents How to use this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 How to read the instruction pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1 Basic operations How to use the mode dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents 5 Focusing functions AF frame selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Focus mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-AF (single AF) shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Simultaneous use of S-AF mode and MF mode (S-AF+MF) . . . . . . . . . . . . C-AF (continuous AF) shooting. . . . . . . . . . . . . . .
Table of Contents 8 Customizing the settings/functions of your camera Custom reset setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AEL/AFL mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AEL/AFL memo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AEL metering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents Direct printing (PictBridge) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting the camera to a printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Easy printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flowchart for custom printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting the print mode . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents 13 Accessories BLM-1 Li-ion Battery / BCM-2 Li-ion Battery Charger . . . . . . . . . . . . . . . . . . . . How to use the LBH-1 Lithium Battery Holder . . . . . . . . . . . . . . . . . . . . . . . . . . ZUIKO DIGITAL interchangeable lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZUIKO DIGITAL 14-45mm f3.5-5.6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZUIKO DIGITAL 17.5-45mm f3.5-5.6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
For customers in North and South America For customers in USA Declaration of Conformity Model Number : E-500 Trade Name : OLYMPUS Responsible Party : Address : Two Corporate Center Drive, P.O. Box 9058, Melville, NY 11747-9058 U.S.A. Telephone Number : 1-631-844-5000 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
Safety precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL. Lightning flash with an arrowhead, enclosed in a triangle, alerts you to the presence of uninsulated voltage points inside the product which could cause a serious electrical shock.
Safety precautions Heat — Never use or store this product near any heat source such as a radiator, heat register, stove, or any type of equipment or appliance that generates heat, including stereo amplifiers. Servicing — Refer all servicing to qualified personnel. Attempting to remove the covers or disassemble the product, could expose you to dangerous high voltage points.
Safety precautions z Keep young children and infants away from the camera. If not, the following dangerous situations may occur: • Becoming entangled in the camera strap or power cords, causing strangulation. If this happens, follow the doctor’s instructions. • Accidentally swallowing the battery or other small parts. • Accidentally firing the flash into their own eyes or those of another child. • Accidentally being injured by the moving parts of the camera.
Safety precautions z When the camera contains metal parts, overheating can result in a low-temperature burn. Pay attention to the following: • When used for a long period, the camera will get hot. If you hold on to the camera in this state, a low-temperature burn may be caused. • In places subject to extremely cold temperatures, the temperature of the camera’s body may be lower than the environmental temperature. If possible, wear gloves when handling the camera in cold temperatures.
Safety precautions z Never attempt to modify the battery compartment on the camera, never insert anything (other than the specified battery) into the compartment. z If the battery leaks, becomes discolored or deformed, or appears abnormal in any way during operation, stop using the camera immediately. Contact your dealer or an authorized Olympus service center. Continued use may result in fire or electric shock.
Safety precautions z Do not place the camera near anything that could be affected by magnetism (e.g. credit card, floppy disk, etc.). Doing so may destroy the data on these items. LCD monitor z Do not push the monitor forcibly; otherwise the image may become fuzzy, resulting in a playback mode failure or damage to the monitor. If the monitor is damaged, be careful not to get any of the liquid crystals from the monitor in your mouth. If liquid crystals get on your limbs or clothes, wash them off.
Safety precautions Legal and other notices z Olympus makes no representations or warranties regarding any damages, or benefit expected by using this unit lawfully, or any request from a third person, which are caused by the inappropriate use of this product. z Olympus makes no representations or warranties regarding any damages or any benefit expected by using this unit lawfully which are caused by erasing picture data.
1 Basic operations This camera is equipped with a variety of easy shooting modes that automatically adjust focus and exposure as required, as well as automatically popping up the built-in flash when required. A variety of advanced shooting modes are available, enabling you to take advantage of professional shooting techniques. Many functions can be set or adjusted with easy button operations while referring to the menus displayed on the largesize LCD monitor.
How to use the mode dial 1 This camera has the following shooting modes, which can be switched using the mode dial. Basic operations Easy shooting modes This camera features 6 creative modes and 15 scene modes that automatically optimize the exposure for the subject. AUTO Full-auto shooting Allows you to shoot using a lens aperture (f value) and shutter speed set by the camera. In low-light conditions, the flash automatically pops up and fires. This mode is recommended for normal shooting conditions.
How to use the mode dial Advanced shooting modes The 4 shooting modes below will help you take advantage of a variety of advanced shooting techniques. 1 A Aperture priority shooting Allows you to set the aperture manually. The camera sets the shutter speed automatically. g P. 41 S Shutter priority shooting Allows you to set the shutter speed manually. The camera sets the aperture automatically. g P. 43 M Manual shooting Allows you to set the aperture and shutter speed manually. g P.
Control panel screen and function settings Control panel screen display 1 1 Basic operations When the power switch is set to ON, the control panel screen (shooting information) is displayed on the monitor. Power switch • If the control panel screen does not appear, press the INFO button. • When the mode dial is set to menu is displayed. g P.
Control panel screen and function settings Setting using direct buttons 1 1 Press the button for the function you want to set (direct button). • The direct menu is displayed. Basic operations Ex.) When setting white balance 2 Direct menu 2 Use the control dial 1 to set. • If you do not operate the control dial within a few seconds ("Button timer" g P. 136), the control panel screen will be restored and your setting will be confirmed. Your setting can also be confirmed by pressing the i button.
Control panel screen and function settings Setting on the control panel screen 1 1 Press the i button. • The cursor on the control panel screen lights. Basic operations 4 Control panel screen 2 Cursor 1, 3 2 Use the arrow pad to move the cursor to the function you want to set. Ex.) When setting white balance 3 Press the i button. • The direct menu is displayed. Direct menu 4 Use the control dial to set.
Control panel screen and function settings Setting on the menu 1 Press the MENU button. 1 • The menu is displayed on the monitor. Basic operations MENU button Arrow pad Operation guide is displayed at the bottom of the screen. 2 CANCEL J : Press MENU to cancel the setting. SELECT J : Press dac to select the item. The illustration displayed corresponds to the arrow pad shown below. :a :c :d :b GO J : Press i to confirm your settings. Use to select a tab.
Control panel screen and function settings 3 Select a function. 1 Function Basic operations Press Press Goes to the selected function’s setting screen. (Some functions can be set on the menu.) Press 4 Select a setting. Press Press Setting Setting screen 5 Press i repeatedly until the menu disappears. • Normal shooting screen is restored. Menu operation procedures This manual shows the menu operation procedures as below. Ex.
2 Things to know before shooting The camera focuses automatically if you simply press the shutter button in the AUTO mode. However, sometimes you may come across a subject that is difficult to focus on. This chapter explains how to deal with those hard-to-focus subjects. Another important thing is to select the appropriate record mode before you start shooting.
How to use card media The camera is equipped with two card slots; you can use CompactFlash or Microdrive simultaneously with the xD-Picture Card. Selecting the card type 2 Select the type of card you want to use (xD-Picture Card or CompactFlash). Things to know before shooting 1 2 Menu Use [CF] [xD] 3 [ ] [CF/xD] to set. CompactFlash xD-Picture Card Press the i button. Formatting the card Formatting prepares cards to receive data.
If correct focus cannot be obtained The camera's auto-focus may not able to focus on the subject in the cases shown below (e.g. when the subject is not in the center of the frame, when the subject has lower contrast than its surroundings, etc.). If this happens, the easiest solution is to use focus lock. Subjects that are difficult to focus on 2 Subject with low contrast Excessively bright light in center of frame Things to know before shooting The AF confirmation mark blinks.
If correct focus cannot be obtained 2 Press the shutter button halfway until the AF confirmation mark lights. • The focus is locked. The AF confirmation mark and the AF focusing frame light up in the viewfinder. • If the AF comfirmation mark blinks, press the shutter button halfway again. • The control panel screen disappears. 2 Halfway down Things to know before shooting AF confirmation mark 3 While keeping the shutter button pressed halfway, re-compose your shot.
Selecting the record mode You can select a record mode in which to take pictures. Choose the record mode that’s best for your purpose (printing, editing on a PC, website editing, etc.). For details about record modes and number of pixels, refer to the table on P. 31.
Selecting the record mode How to select the record mode 2 1 2 Menu Use [ ] [D] to set. [RAW] / [TIFF] / [SHQ] / [HQ] / [SQ] / [RAW+SHQ] / [RAW+HQ] / [RAW+SQ] Things to know before shooting 3 Press the i button. Setting the number of pixels and compression rate 1 2 Menu [ ] [HQ] Menu [ ] [SQ] Follow the steps depending on the record mode you have selected. [HQ] 1) Use to set the compression rate. [1/4] / [1/8] / [1/12] [SQ] 1) Use to set the number of pixels.
Selecting the record mode Record mode Record mode Number of pixels (PIXEL COUNT) Compression File format RAW Uncompressed ORF 13.6 TIFF Uncompressed TIFF 24.5 SHQ 3264x2448 3200x2400 2560x1920 1600x1200 1/2.7 6.4 1/4 4.5 1/8 2.5 1/12 1.8 1/2.7 6.2 1/4 4.4 1/8 2.4 1/12 1.8 1/2.7 3.7 1/4 2.5 1/8 1.3 1/12 0.8 1/2.7 1.5 1/4 1.0 1/8 1/12 SQ 1280x960 1024x768 640x480 JPEG 2 Things to know before shooting HQ File size (MB) 0.5 0.4 1/2.7 0.9 1/4 0.6 1/8 0.
3 Selecting the right mode for shooting conditions Close-ups of small objects like flowers or jewelry, capturing a fast-moving subject like a child running around, shooting with a natural-looking illuminated background at night — did you ever wonder how to achieve the results you want without complicated and time-consuming camera settings? With this camera, you will find a new way of capturing all those special moments and effects in an instant.
Shooting modes This camera has different shooting modes, which can be switched using the mode dial. 3 AUTO is recommended for normal shooting conditions. The shutter speed and aperture value that have been set automatically by the camera are displayed on the viewfinder and control panel screen. When the camera is set to , the scene menu is displayed.
Easy shooting modes When you select a mode to suit the shooting situation, the camera optimizes the settings for the shooting situations. Creative modes 1 3 Set the mode dial to the mode you want to use. Selecting the right mode for shooting conditions AUTO i l & j / Full-auto shooting The camera sets the optimum aperture value and shutter speed automatically according to the subject brightness. In low-light conditions, the flash automatically pops up and fires.
Easy shooting modes Scene modes 1 Set the mode dial to . • The scene menu appears. 2 Use ac to select the scene mode. • A sample image of the selected mode is displayed. 3 3 Press the i button. I 1 PORTRAIT Suitable for shooting a portrait-style image of a person. Only the subject is brought into focus with a blurred background. L 2 LANDSCAPE Suitable for shooting landscapes and other outdoor scenes. Vivid reproduction of blues and greens.
Easy shooting modes G4 NIGHT SCENE Suitable for shooting images of outdoor scenes in the evening or at night. Usually a street at night makes a dark image with only the sparkle of lights such as street lamps due to the lack of brightness.This mode allows you to capture the true appearance of the street. 3 • Since the shutter speed is slow, be sure to stabilize the camera.
Easy shooting modes 8 HIGH KEY Optimized for bright scenes. Subject brightness is correctly reproduced, producing an image with impact. 3 Optimized for dark scenes. Subject darkness is correctly reproduced, without producing dark shadows. 10 MACRO The camera closes the aperture and focuses across a wider range in the forward and backward directions (more depth of field) to enable you to shoot close-up pictures (macro shooting).
Easy shooting modes * 12 SUNSET Suitable for taking sunset pictures. Vivid red and yellow color reproduction. • The flash cannot be used. • Since the shutter speed is slow, be sure to stabilize the camera. 3 Selecting the right mode for shooting conditions ( 13 FIREWORKS Suitable for shooting fireworks. • Since the shutter speed is slow, be sure to stabilize the camera. • The flash cannot be used. • AF is not possible. Use manual focus (MF). @ 14 DOCUMENTS Suitable for shooting documents, etc.
Advanced shooting modes For more advanced shooting and greater creative control, you can set the aperture value and shutter speed. P : Program shooting The camera sets the optimum aperture value and shutter speed automatically according to the subject brightness. This mode is useful if you do not necessarily want to use the flash. You can also perform program shift as needed to change the combination of aperture and shutter speed while keeping the correct EV (exposure value). Set the mode dial to P.
Advanced shooting modes Aperture values and shutter speeds in the P mode In the P mode, the camera is programed so that the aperture value and shutter speed are selected automatically according to the subject brightness as shown below. 3 Selecting the right mode for shooting conditions When using the ED 50mm f2 MACRO lens (e.g. when EV is 7, the aperture value is set to F2 and the shutter speed to 1/30.) When using the 14mm-54mm f2.8-3.5 zoom lens (focal length : 54mm) When using the 14mm-54mm f2.8-3.
Advanced shooting modes A : Aperture priority shooting The camera sets the optimum shutter speed automatically for the aperture value you have selected. When you open the aperture (decrease the aperture value), the camera will focus within a shorter range (shallow depth of field) and produce a picture with a blurred background.
Advanced shooting modes 3 Press the shutter button halfway. • Focusing is performed and the AF Halfway down confirmation mark lights on the viewfinder. • The shutter speed that has been set automatically by the camera is displayed on the viewfinder. Shutter speed 3 Shutter speed Aperture value Viewfinder Selecting the right mode for shooting conditions AF confirmation mark AF confirmation mark Exposure mode Exposure mode Overexposed when the shutter speed indication is blinking.
Advanced shooting modes S : Shutter priority shooting The camera sets the optimum aperture value automatically for the shutter speed you have selected. Set the shutter speed depending on the type of effect you want: a higher speed shutter allows you to capture a fast-moving subject without blur, and a slower shutter speed blurs a moving subject, creating a feeling of speed or motion. 3 1 Set the mode dial to S. 2 Rotate the control dial shutter speed.
Advanced shooting modes 3 Press the shutter button halfway. • Focusing is performed and the AF confirmation mark lights on the viewfinder. • The aperture value that has been set automatically by the camera is displayed on the viewfinder.
Advanced shooting modes M : Manual shooting You can set both aperture value and shutter speed manually, while referring to the exposure level indicator. This mode gives you more creative control, allowing you to make whatever settings you like, regardless of the correct exposure. Bulb shooting is also possible, allowing you to take astronomical or fireworks pictures. 1 2 Set the mode dial to M. 3 to set the • Control dial factory default settings: To set the shutter speed: Rotate the control dial.
Advanced shooting modes Underexposure Overexposure Optimum exposure 3 Take the picture. 3 All the way down Selecting the right mode for shooting conditions Noise in images During shooting at slow shutter speeds of 30 or more seconds, noise may appear on-screen or the image may be overly bright in the top left part of the screen.
Preview function If you press the V (One-touch WB) button, the viewfinder shows the actual depth of field (the distance from the nearest to the furthest point of perceived “sharp” focus) in a picture, with the selected aperture value. Assign preview function to the V button beforehand. g "V button function" (P. 128) 1 Press the V button. V button 3 Selecting the right mode for shooting conditions Notes • The metering values cannot be changed in the preview mode.
4 Various shooting functions The flash and drive modes (sequential shooting) are the keys to advanced shooting techniques. Selecting a flash mode to suit a specific shooting situation or adjusting the amount of light emitted by the flash will produce an image that is different from what would be obtained when less precise settings are used. In shooting modes such as AUTO, PORTRAIT, and NIGHT+PORTRAIT, the built-in flash will automatically pop up in low light or backlight conditions.
Auto bracketing You can use this function if you are unsure of the exposure and white balance settings and cannot change and retake the shot several times. This camera is capable of the following types of auto bracketing: Auto bracketing Comparison Ref. Page P. 83 WB bracketing* Creates frames with different white balances from one shot. P. 92 MF bracketing Shoots multiple frames at different focusing points. P.
Flash shooting Flash mode The camera sets the flash mode according to various factors such as firing pattern and flash timing. Available flash modes depend on the exposure mode. The flash modes are available to optional external flashes. When the mode dial is set to anything except P, A, S, or M, the built-in flash will pop up automatically in low light conditions. Auto-flash AUTO 4 The flash fires automatically in low light or backlight conditions.
Flash shooting 1st curtain Usually, the flash fires right after the shutter fully opens. This is called 1st curtain. Unless you change it, this is how the flash always fires. Slow synchronization #SLOW2 2nd curtain flash fires just before the shutter closes. Changing the flash timing can create interesting effects in your picture, such as expressing the movement of a car by showing the tail-lights streaming backwards. The slower the shutter speed, the better the effects turn out.
Flash shooting Flash off $ The flash does not fire. In this mode, the flash can be used as an AF illuminator when it is raised. g "AF illuminator" (P. 75) Flash synchronization speed Shutter speed can be changed when the built-in flash fires. g "Speed synchronization" (P. 126) 4 Manual flash Various shooting functions This allows the built-in flash to output a fixed amount of light. With [MANUAL FLASH] set to [ON] (g P. 125), the amount of light can be selected in the flash mode setting.
Flash shooting Flash modes available in different exposure mode Control panel Exposure screen/menu mode display AUTO Auto-flash ! Auto-flash (red-eye reduction) # Fill-in flash AUTO P A & l /*2 j S $ Flash off !SLOW Slow synchronization (red-eye reduction) #SLOW Slow synchronization (1st curtain) #SLOW2 Slow synchronization (2nd curtain) #FULL Manual flash (FULL) #1/4 Manual flash (1/4) #1/16 Manual flash (1/16) #1/64 Manual flash (1/64) # Fill-in flash H Fill-in flash (red-eye
Flash shooting Setting the flash mode 4 1 i 2 Use the control dial i Flash mode to set. Various shooting functions g "Flash modes available in different exposure mode" (P. 53) 3 Press the i button. • You can also set the flash with the # (flash) switch. You can set the finder when you use the # (flash) switch.
Flash shooting Using the built-in flash If you shoot a subject using a lens that is wider than 14 mm (equivalent to 28 mm on a 35 mm film camera), the light emitted by the flash may produce a vignette effect. Whether or not this occurs depends on lens type and shooting conditions (such as distance to the subject). 1 Set the power switch to ON. Press the # (flash) switch to raise the flash.
Flash shooting Flash intensity control This adjusts the amount of light emitted by the flash. In some situations (e.g., when shooting small subjects, distant backgrounds, etc.), you may get better results by adjusting light emission. It is useful when you intend to increase the contrast (distinction between light and dark) of images to make the images more vivid. 4 1 2 3 Menu [ Use ] [w] to set the compensation value. Press the i button.
Flash shooting Flash bracketing The camera shoots multiple frames, changing the amount of light emitted by the flash for each shot. 1 2 Menu [ Use ] [FL BKT] to set. [OFF] / [3F 0.3EV] / [3F 0.7EV] / [3F 1.0EV] • You can change the EV step interval in the custom menu. g "EV step" (P. 123) 4 Press the i button.
Flash shooting Using the external electronic flash Be sure to attach the flash to the camera before turning on the flash’s power. 1 4 Remove the hot shoe cover by sliding it in the direction indicated by the arrow in the illustration. • Keep the shoe cover in a safe place to avoid losing it, and put it back on the camera after flash shooting. Various shooting functions 2 Attach the electronic flash to the hot shoe on the camera.
Flash shooting 5 Select the flash control mode. Viewfinder • TTL-AUTO is recommended for normal use. 6 Press the shutter button halfway. • Shooting information such as ISO sensitivity, aperture value, and shutter speed is communicated between the camera and flash. • # lights up in the viewfinder. 7 Press the shutter button all the way. # blinks: Flash charging. # lights up: Charging is complete.
Flash shooting Super FP flash Super FP flash is available with the FL-50/FL-36. Super FP flash timing is longer than standard flash timing. This means that pictures can be taken at a higher shutter speed than is possible with normal flashes. Fill-in flash shooting with the aperture open (such as in outdoor portrait shooting) is also possible with Super FP flash. For details, refer to the external flash’s manual.
Flash shooting Notes • The flash fires each time the shutter is released. When you do not need to use the flash, turn off the flash’s power. • Check beforehand that the flash you are using is synchrorized with the camera. • Depending on the camera's shooting mode, the built-in flash may pop up automatically and strike the external flash. • You can prevent the flash from automatically popping up by setting the auto flash pop up function to Off. g "Auto flash popup" (P.
Single-frame shooting/sequential shooting j Single-frame shooting o Shoots 1 frame at a time when the shutter button is pressed. (normal shooting mode) Sequential shooting j Shoots 4 frames or more at 2.5 frames/sec. for as long as the shutter button is pressed. Focus and exposure are locked at the first frame (in S-AF, MF). 4 1 Press the
Self-timer shooting Y This function lets you take pictures using the self-timer. You can set the camera to trigger the shutter after either 12 or 2 seconds. Fix the camera securely on a tripod for self-timer shooting. Setting self-timer 1 Press the
Self-timer shooting Using the self-timer 1 Press the shutter button all the way. • A picture is taken. • The focus and exposure are locked when the shutter button is pressed halfway. • When Y12S is selected: First, the selftimer lamp lights up for approximately 10 seconds, then it blinks for approximately 2 seconds and the picture is taken. When Y2S is selected: The self-timer lamp lights up for approximately 2 seconds, then the picture is taken.
Remote control shooting < By using the optional remote control (RM-1), you can take a picture with yourself in it or a night scene without touching the camera. The camera can be set to trigger the shutter either right away or 2 seconds after the shutter button on the remote control is pressed. Bulb shooting is also possible when using the optional remote control. Setting the remote control 1 Press the
Remote control shooting Using the remote control 1 2 Mount the camera on a tripod or place it on a stable, flat surface. Point the remote control at the remote control receiver on the camera and press the shutter button on the remote control. Remote control lamp Remote control receiver • When <0S is selected: The focus and exposure are locked, the remote control lamp blinks and the picture is taken.
Remote control shooting TIPS The remote control lamp does not blink after the shutter button on the remote control is pressed. J The transmitted signal may not be effective if the remote control receiver is exposed to powerful lighting. Move the remote control closer to the camera and press the shutter button on the remote control again. J The transmitted signal may not be effective if the remote control is too far from the camera.
5 Focusing functions This camera is equipped with an auto focus function that lets you focus quickly, easily, and automatically. You can also choose from a variety of other focus modes — including AF frame selection and C-AF — to suit different subjects and shooting conditions. Naturally, manual focusing is also available. Focusing is the key to great photography, so be sure to learn how to take advantage of these functions.
AF frame selection Normally, the camera measures the distance to the subject using the 3 AF frames in the viewfinder and selects the most appropriate point. This function allows you to select only one AF frame. AUTO or (AUTO) Focuses using the 3 AF frames. Viewfinder Center AF frame Focuses using the left AF frame. Focuses using the center AF frame. Focuses using the right AF frame. Left AF frame 1 Press the button. 2 Use the control dial 3 Press the shutter button all the way to take the picture.
Focus mode AF Three focus modes are available with this camera: S-AF (single AF), C-AF (continuous AF) and MF (manual focus). 1 2 Press the AF (focus mode) button. Use the control dial to set. S-AF / C-AF / MF / S-AF+MF / C-AF+MF g "S-AF (single AF) shooting" (P. 71) "Simultaneous use of S-AF mode and MF mode (S-AF+MF)" (P. 71) "C-AF (continuous AF) shooting" (P. 72) "Simultaneous use of C-AF mode and MF mode (C-AF+MF)" (P. 72) "Manual focus (MF)" (P.
Focus mode S-AF (single AF) shooting Focusing is performed once when the shutter button is pressed halfway. If focusing fails, release your finger from the shutter button and press it halfway again. This mode is suitable for taking pictures of nonmoving subjects or subjects with limited movement. 1 Press the shutter button halfway. 2 Press the shutter button all the way.
Focus mode C-AF (continuous AF) shooting The camera repeats focusing. When the subject is in motion, the camera focuses on the subject in anticipation of its movement (Predictive AF). Even if the subject moves or you change the composition of the picture, the camera continues trying to focus. 5 1 Press the shutter button halfway and keep it in this position. Focusing functions • When the subject is in focus and locked, the AF confirmation mark lights up.
Focus mode TIPS Another way to adjust focus manually using the C-AF mode: J You can set the AEL/AFL button to operate C-AF with the AEL/AFL mode settings. g "AEL/AFL mode" (P. 121) Notes • If the shutter button is pressed again after fine-adjusting focus with the focus ring, the AF is activated and your adjustments are canceled. Manual focus (MF) This function allows you to manually focus on any subject while looking through the viewfinder. Adjust the focus using the focus ring.
MF bracketing The camera shoots multiple frames, changing the focal point slightly for each frame. The frames are saved on the card in the following order: the frame with the manually set focal point, the frame with the focal point shifted backward, and the frame with the focal point shifted forward. 1 2 Menu [ ] [MF BKT] Use the control dial to set.
AF illuminator The built-in flash can function as an AF illuminator. This helps with focusing in low-light conditions in the AF mode. 1 2 3 Menu [ Use ] [AF ILLUMINATOR] to select [ON] or [OFF]. Press the i button. Shutter release priority 5 1 Follow the steps depending on the focus mode you selected. S-AF mode Menu [ ] [RELEASE PRIORITY S] ] [RELEASE PRIORITY C] C-AF mode Menu 2 3 Use [ to select [ON] or [OFF]. Press the i button.
6 Exposure, image and color If you wish to go beyond simple shooting using only the shutter button, you will find various functions that can be used to modify image/brightness/exposure parameters to achieve remarkably better results. For instance, if you want to shoot atmospheric pictures indoors, or if your subject would strongly reflect the flash light, shooting without the flash would typically result in a blurred or dark picture.
Metering mode — Changing the metering system There are 5 ways to measure the subject brightness: Digital ESP metering, Center weighted averaging metering, and three types of spot metering. Select the most suitable mode for the shooting conditions. 1 2 Press the (metering) button. Use the control dial to set.
Metering mode — Changing the metering system Digital ESP metering The camera measures the light levels and calculates the light level differences in 49 separate areas of the image. This precision ensures accurate metering even when there is a lot of contrast between the center of the screen and the area around it, such as when shooting backlit subjects or shooting under very bright light. This mode is recommended for general use.
Exposure compensation — Varying the image brightness F In some situations, you may get better results if you manually compensate (adjust) the exposure value set automatically by the camera. In many cases, bright subjects (such as snow) will turn out darker than their natural colors. Adjusting toward + makes these subjects closer to their real shades. For the same reason, adjust toward - when shooting dark subjects. The exposure can be adjusted in range of ±5.0 EV. -2.0EV 1 +2.
Exposure compensation — Varying the image brightness How to read the exposure compensation indicator Control panel screen Exposure compensation indicator Exposure compensation indicator with 1/3EV selected 6 1/3EV Exposure, image and color Exposure compensation indicator with 1/2EV selected 1/2EV • If the exposure compensation value exceeds the scale of the exposure compensation indicator, - or + turns red. • The exposure compensation indicator disappears if the exposure is compensated by 0.
AE lock — Locking the exposure [ The metered exposure value can be locked with the [ button (AE lock). Use AE lock when you want a different exposure setting from the one that would normally apply under the current shooting conditions. Normally, pressing the shutter button halfway locks both AF (auto focus) and AE (automatic exposure), but you can lock the exposure alone by pressing the [ button.
ISO — Setting the desired sensitivity to light The higher the ISO value, the greater the camera’s light sensitivity and the better its ability to shoot in low light conditions. However, higher values may give pictures a grainy appearance. 1 2 Press the ISO button. Use the control dial ISO value.
AE bracketing The camera automatically shoots a number of pictures at different exposure values for each frame. Even in conditions where correct exposure is difficult to obtain (such as a backlit subject or a scene at dusk), you can pick the picture you prefer from a selected number of frames with a variety of different exposure settings (exposure and compensation values).
AE bracketing How AE bracketing compensates exposure in each exposure mode Depending on the selected exposure mode, exposure is compensated in the following way: AUTO mode : Aperture value and shutter speed P mode A mode S mode M mode : : : : Aperture value and shutter speed Shutter speed Aperture value Shutter speed TIPS To apply AE bracketing to the exposure value you have compensated: J Compensate the exposure value, then use the AE bracketing feature.
White balance — Adjusting the color tone Color reproduction differs depending on the light conditions. For instance, when daylight or tungsten lighting is reflected on white paper, the shade of white produced will be slightly different for each. With a digital camera, white color can be adjusted to reproduce more natural white with a digital processor. This mechanism is called white balance. There are 4 options for setting the WB with this camera.
White balance — Adjusting the color tone Color temperature 6 The spectral balance of different white light sources is rated numerically by color temperature — concept of physics, expressed using the Kelvin (K) temperature scale. The higher the color temperature, the richer the light in bluish tones and the poorer in reddish; the lower the color temperature, the richer the light in reddish tones and the poorer in bluish.
White balance — Adjusting the color tone Setting the auto/preset white balance WB You can adjust the white balance by selecting the appropriate color temperature for the light conditions. 1 Press the WB (white balance) button. 2 Use the control dial Control dial to set. AUTO / 5 / 3 / 2 / 1 / w / x / y / V / CWB Viewfinder : AUTO : w /x / y : Custom WB 6 WB button Displayed when WB is set to anything except AUTO.
White balance — Adjusting the color tone Control panel setting procedure i WB i Menu setting procedure Menu [ ] [WB] Setting TIPS 6 When subjects with no white appear white in the image: J In the auto WB setting, if there is no near-white color in the image framed in the screen, the white balance will not be correctly determined. In such a case, try preset WB or one-touch WB settings.
White balance — Adjusting the color tone Setting the custom white balance 1 2 Press the WB (white balance) button. 3 While holding down the F (exposure compensation) button, rotate the control dial until the desired setting is displayed. F button Use the control dial to select the custom white balance. WB button • The custom white balance can be set from 2000K to 14000K.
White balance — Adjusting the color tone Setting the one-touch white balance This function is useful when you need a more precise white balance than preset WB can provide. Point the camera at a sheet of white paper under the light source you want to use to determine the white balance. The optimum white balance for the current shooting conditions can be saved in the camera. This is useful when shooting a subject under natural light, as well as under various light sources with different color temperatures.
White balance — Adjusting the color tone WB Compensation This function lets you make fine changes to the auto WB and preset WB settings. 1 2 Menu 3 Use [ ] [WB] Use to select the white balance to adjust. R-B G-M to select the color direction. Red - Blue Green - Magenta 6 Exposure, image and color • You can set both color directions.
White balance — Adjusting the color tone WB bracketing Three images with different white balances (adjusted in specified color directions) are automatically created from one shot. One image has the specified white balance, while the other two are the same image adjusted in different color directions. All three images are saved on the card. 1 2 Menu Use R-B G-M [ ] [WB BKT] to select the color direction. Red - Blue Green - Magenta • You can set both color directions.
Picture mode You can select image tone to create unique image effects. You can also fineadjust image parameters such as contrast and sharpness for each mode. 1 2 Menu Use [ ] [PICTURE MODE] to select the picture effect mode. [VIVID] Produces vivid colors. [NATURAL] Produces natural colors. [MUTED] Produces flat tone. [MONOTONE] Produces black and white tone. [SEPIA] Produces sepia tone. 3 Use to adjust the item below. Available adjustment parameters vary depending on the selected mode.
Gradation Two types of gradation are available. HIGH KEY: Extended bright gradations. LOW KEY : Extended dark gradations. HIGH KEY Suitable for a subject that is mostly highlighted. 1 2 6 Menu Use [ ] LOW KEY Suitable for a subject that is mostly shadowed. [GRADATION] to set. [HIGH KEY] / [NORMAL] / [LOW KEY] • Use [NORMAL] mode for general uses. Exposure, image and color 3 Press the i button. Notes • Contrast adjustment does not work when set to HIGH KEY or LOW KEY.
Noise reduction This function reduces the noise that is generated during long exposures. When shooting night scenes, shutter speeds are slower and noise tends to appear in images. When [NOISE REDUCTION] is set to [ON], the camera automatically reduces noise to produce clearer images. However, shooting time is approximately twice as long as usual. ON OFF 1 Menu [ [ON] 2 3 Press the i button. ] [NOISE REDUCTION] 6 Exposure, image and color Take the picture.
Color space This function lets you select how colors are reproduced on the monitor or printer. The first character in image file names indicates the current color space. g "File name" (P. 131) Pmdd0000.jpg P: sRGB _ : Adobe RGB [sRGB] [Adobe RGB] 1 2 3 Menu Use [ ] Standardized color space for Windows Color space that can be set by Adobe Photoshop [COLOR SPACE] to select [sRGB] or [Adobe RGB]. Press the i button.
7 Playback One of the big advantages of a digital camera is that as soon as you take a picture, you can see how it looks right away. That means that if the picture is out of focus or just hasn’t turned out the way you want, you can erase it and try again. With a film camera, on the other hand, you won’t know if there is a problem with the picture until you get the film developed.
Single-frame playback There are several different ways to view and edit images. However, before using any of these functions, follow step 1 below. 1 Press the q (playback) button. • The monitor turns off after about 1 minute if no operations are performed. If no operations are done after that, the camera turns off automatically (the factory default setting is four hours). Turn on the camera again. The last recorded image appears. q button 7 Playback 2 Use to select images you want to view.
Close-up playback U This function lets you enlarge images displayed on the monitor. This is useful when you want to check the details in an image. 1 Control dial Each time you rotate the control dial toward U, the image is enlarged in steps of 2x - 14x. • Rotating the control dial toward G restores the previous image size. INFO button Changing close-up position 1 During close-up playback, use in the direction you want to move.
Light box display You can view multiple images simultaneously during close-up (g P. 99). This is useful if you want to check images you recorded using bracketing. 1 Press the V (one-touch WB) button during single-frame playback. The image is enlarged by 10 times and displayed within a frame. V button • Use to select the part of the picture you want to enlarge and press the V button again. Close-up playback is possible. 2 7 Press the button.
Index display G This function lets you show several images on the monitor at the same time. This is useful when you want to quickly search a number of pictures to find a particular image. 1 Each time you rotate the control dial toward G , the number of images shown changes from 4 to 9 to 16 to 25. Control dial b: Moves to the previous frame. d: Moves to the next frame. a: Moves to the upper frame. c: Moves to the lower frame. • Turn the control dial to U to return to Single-frame playback.
Calendar display With the calendar, you can display images recorded on the card by date. If more than one image was taken on a single date, the image shot first on that date is displayed. 7 1 During index display (g P. 101), rotate the control dial toward G until the calendar screen is displayed. 2 Use to select images you want to view.
Information display INFO This allows you to display detailed information about the image. Luminance information can also be displayed with histogram and highlight graphs. INFO button 1 Press the INFO button repeatedly until the desired information is displayed. • This setting is stored and will be shown the next time the information display is called up.
Information display Information 1 Frame number, print reservation, protect, record mode, number of pixels and file number. Information 2 Frame number, print reservation, protect, record mode, compression, date and time and file number. 7 Histogram Playback Shows you the distribution of brightness in recorded images. Checking the histogram will enable more precise exposure control for subsequent shots. Record mode is also displayed.
Information display Highlight display The overexposed (highlighted) parts of the recorded image blink. Record mode is also displayed. Overexposure Shadow display The underexposed (shadowed) parts of the recorded image blink. Record mode is also displayed. 7 Playback Underexposure Overall information Displays shooting information, histogram and highlight simultaneously.
Slideshow This function displays images stored on the card one after another. Images are displayed one by one for about 5 seconds starting from the currently displayed image. Slideshow can be performed using index display. You can select the number of images displayed during slideshow from 1, 4, 9, 16 or 25. 1 2 7 Menu Use [q] [m] to set.
Rotating images This function lets you rotate images and display them vertically on the monitor. This is useful for viewing pictures that were taken with the camera held vertically. Menu [q] [y] [ON] • When it is set to ON, images that were taken vertically are automatically rotated and played back. You can also press the F button to rotate the image. • The rotated image will be recorded on the card.
Playback on TV Use the video cable provided with the camera to play back recorded images on your TV. 1 Turn the camera and TV off, and connect the video cable as illustrated. 2 Turn on the TV and set it to the video input mode. For details on switching to the video input mode, refer to the TV’s instruction manual. 3 Turn the camera on and press the q (playback) button.
Editing still images Recorded images can be edited and saved as new images. Available editing functions depend on the image format (image record mode). A JPEG or TIFF file can be printed as is without modification. A RAW file, on the other hand cannot be printed as is. To print a RAW file, use the RAW edit function to convert the RAW data format to JPEG.
Editing still images 1 2 Menu [q] [EDIT] Use to select images you want to view. Press the i button. • The camera recognizes the image data format. • When you select an image that is saved in both RAW and JPEG, a screen for selecting which data to edit is displayed. 3 The setting screen varies depending on the image data format. Select the data you want to edit and do the following steps depending on the image data format.
Editing still images SEPIA 1 2 Use ac to select [SEPIA]. Press the i button. Use ac to select [YES]. Press the i button. • To edit another image, use bd to select the desired image. • To complete editing, press the MENU button. REDEYE FIX 1 2 Use ac to select [REDEYE FIX]. Press the i button. Use ac to select [YES]. Press the i button. • To edit another image, use bd to select the desired image. • To complete editing, press the MENU button.
Editing still images Resizing Q 1 Use ac to select [Q]. Press the i button. 2 Use ac to select the number of pixels, then press the i button. • The [BUSY] bar is displayed when editing is in progress. • The resized image is saved as a new image. • To edit another image, use bd to select the desired image. • To complete editing, press the MENU button.
Copying images This function lets you copy images to and from the xD-Picture Card and CompactFlash or Microdrive. This menu can be selected if both cards are inserted. The selected card is the copying source. Copying all the frames 1 2 3 4 Menu [q] [COPY ALL] Press the d button. Use ac to select [YES]. Press the i button. Copying selected frames 1 Display the image you want to copy and then press the i button. 7 • The selected image is shown in a red frame.
Protecting images — Preventing accidental erasure 0 Protect images you do not want to erase. Protected images cannot be erased by the selected frame/all-frame erase function. 1 Play back the image you want to protect. g P. 98 2 Press the AEL/AFL/0 (protect) button. AEL/AFL/0 button • 9 is displayed on the screen. Protect mark 7 Playback To cancel the protection Display the images that are protected and press the AEL/AFL/0 button.
Erasing images Lets you erase recorded images. You can select either single-frame erase, which erases only the currently displayed image, or all-frame erase, which erases all the images stored on the card. Notes • Protected images cannot be erased. Cancel protected images, then erase them. • Once erased, images cannot be restored. g "Protecting images — Preventing accidental erasure" (P. 114) Single-frame erase 1 Play back the image you want to erase. 2 3 Press the S (erase) button.
Erasing images 3 Use ac to select [YES]. Press the i button. • All frames will be erased. Erasing selected frames You can select multiple images and erase them all at once with single-frame playback or index display. 1 Display the image you want to erase and then press the i button. • The selected image is shown in a red frame. • In the index display, use the to select the image you want to erase, and then press the i button. • Press the i button to cancel your selection.
8 Customizing the settings/ functions of your camera Thanks to digital technology you can effortlessly customize many of your cameraís functions. For example, you can call up your favorite functions at the touch of a button, adjust EV step values, or easily call up the functions you customized. This chapter introduces all the functions that can be customized to suit preferences.Try these functions to find ways to use your camera even more effectively.
Custom reset setting Normally, current camera settings (including any changes you have made) are retained when the power is turned off. This camera allows you to restore the factory default settings using [RESET] and register 2 different reset settings in [RESET1] and [RESET2] for later use. Registering reset settings 1 Menu [ ] [CUSTOM RESET SETTING] 2 Use to select either [RESET 1] or [RESET 2] in which to register the settings.
Custom reset setting Functions that can be registered in CUSTOM RESET SETTING & functions that reset to factory default settings Function Factory default setting PICTURE MODE VIVID GRADATION NORMAL D HQ F ±0 NOISE REDUCTION OFF WB AUTO ISO AUTO METERING ESP FLASH MODE Auto-flash*1 B/j o AF S-AF Custom reset setting registration My Mode registration AUTO AE BKT OFF WB BKT OFF FL BKT OFF MF BKT OFF 8 OFF Playback mode Single-frame playback (with no information) ISO STEP
Custom reset setting Custom reset setting registration My Mode registration Function Factory default setting AEL METERING Synchoronized with metering mode. – QUICK ERASE OFF – RAW+JPEG ERASE RAW+JPEG – V FUNCTION V – MY MODE SETUP – – FOCUS RING AF ILLUMINATOR – ON RESET LENS ON RELEASE PRIORITY S OFF – – – RELEASE PRIORITY C ON X 2005.01.
AEL/AFL mode You can use the AEL button to do AF or metering operations instead of using the shutter button. You can use the button in the following ways. • When you want to focus on some subject and then change the composition of the photo. • When you want to set the exposure by metering an area different from where the camera is focused. Select the function of the button to match the operation when the shutter button is pressed. 1 2 Menu Use [ ] [AEL/AFL] to select the focus mode.
AEL/AFL mode Modes available in the S-AF mode Shutter button function Mode Half-press AEL button function Full press When holding down AEL Focus Exposure Focus Exposure Focus Exposure mode 1 Locked Locked – – – Locked mode 2 Locked – – Locked – Locked mode 3 – Locked – – Locked – Modes available in the C-AF mode Shutter button function Mode 8 Half-press AEL button function Full press When holding down AEL Customizing the settings/functions of your camera Focus Exposu
AEL/AFL memo Pressing the [ button toggles the AE lock between on and off. 1 2 3 Menu Use [ ] [AEL/AFL MEMO] to select [ON] or [OFF]. Press the i button. AEL metering Set the metering mode before using the [ button to lock the exposure. This allows the camera to automatically apply the selected metering mode when the AE lock function is used (g P. 81). 1 2 Menu Use [ ] [AEL METERING] to set. 8 [AUTO] / [4] / [5] / [5 HI] / [5 SH] Press the i button.
ISO step This allows you to change the compensation steps for ISO value setting. 1 2 Menu Use [ ] [ISO STEP] to set. [1/3EV] / [1EV] 3 Press the i button. T ISO boost This allows you to make ISO 400 - 1600 available for ISO setting in addition to ISO 100 - 400. [ON+NF] reduces noise at higher ISO values to produce clearer images. 1 2 8 Menu Use [ ] [ISO BOOST] to set. [OFF] / [ON+NF] / [ON] 3 Press the i button.
Compensating all WB This lets you apply the same compensation value to all the white balance modes at once. 1 2 Menu Use [ ] [ALL >] to set. [ALL SET] 3 4 The same compensation value applies to all WB modes. [ALL RESET] The WB compensation value settings applied to each WB mode are all cleared at once. Press the i button. Do the following steps depending on the setting you want. If you select [ALL SET] 1) Use bd to select the color direction.
Speed synchronization You can set the shutter speed that will be used when the built-in flash fires. The speed can be set from 1/60 to 1/180 in 1/3 EV increments. 1 2 3 Menu Use [ ] [#X-SYNC] to select the desired speed. Press the i button. Notes • For details on the synchronization speed of commercially available flashes, refer to their manuals. Auto flash popup You can set the internal flash to not pop up automatically.
Customizing the control dial’s function The control dial factory default settings are as follows: P Program shooting Rotating the control dial : Program shift (Ps) setting Rotating the control dial while holding down the F (exposure compensation) button : Exposure compensation setting M Manual shooting Rotating the control dial : Shutter speed setting Rotating the control dial while holding down the F (exposure compensation) button : Aperture value (f-number) setting You can reverse the designated f
V button function This lets you replace the function assigned to the V (one-touch WB) button by registering another function. 1 Menu [ ] [V FUNCTION] 2 3 8 Use ac to set. [V] One-touch white balance button (factory-default setting) [TEST PICTURE] This enables you to check the picture you have just taken on the monitor (REC VIEW feature) without having to record the picture to the card. This is useful when you want to see how a picture turned out before saving it.
Reset lens This allows you to reset the focus of the lens (infinity) when the power is turned off. 1 2 3 Menu [ ] [RESET LENS] Use ac to select [ON] or [OFF]. Press the i button. Focus ring This allows you to customize how the lens adjusts to the focal point by selecting the rotational direction of the focus ring. 1 2 Menu [ ] [FOCUS RING] Use ac to select [ ] or [ ]. 8 Press the i button.
Quick erase This lets you erase the picture you have just taken immediately using the S (erase) button. 1 2 Menu [ [QUICK ERASE] When the S button is pressed, the confirmation screen appears, asking you if you want to erase the picture. Pressing the S button erases the picture immediately. [OFF] [ON] 3 ] Use ac to set. Press the i button. Erasing RAW and JPEG files You can set the method to erase images saved as [RAW+JPEG]. This function is enabled only when erasing one frame.
File name When you take a picture, the camera assigns it a unique file name and saves it in a folder. The folder and file name can later be used for file handling on a computer. File names are assigned as shown in the illustration below. 1 2 Menu Use [ ] [FILE NAME] to set. [AUTO] 3 Press the i button. Notes • When both the Folder and File No. reach their respective maximum number (999/ 9999), it is not possible to store additional pictures even if the card is not full.
Rename file You can rename image files to make them easier to identify and organize. 1 2 3 Select [sRGB] or [Adobe RGB]. g P. 96 Menu [ ] [EDIT FILENAME] Use ac to enter the first character. Press d to move to the next setting, then use ac to enter the second character. sRGB:Pmdd0000.jpg AdobeRGB:_mdd0000.jpg You can change the first character to OFF, A - Z or 0 - 9. 4 Press the i button.
Setting the warning tone The camera beeps when buttons are pressed. It also beeps to alert you to warnings. You can turn the beep sound on or off with this function. 1 2 3 Menu [ ] [8] Use ac to select [ON] or [OFF]. Press the i button. Monitor brightness adjustment This allows you to adjust the brightness of the monitor for optimal viewing. 1 2 3 Menu [ ] [s] Use ac to adjust the brightness. Press the i button.
USB mode You can connect the camera directly to a computer or printer with the provided USB cable. If you specify the device you are connecting to beforehand, you can skip the USB connection setting procedure normally required every time you connect the cable to the camera. For details on how to connect the camera to either device, refer to Chapter 9 "Printing" (P. 139) and Chapter 10 "Transferring images to a computer" (P. 152). 1 2 Menu [ ] [USB MODE] Use ac to set.
Changing the display language You can change the language used for the on-screen display and error messages from ENGLISH to another language. 1 2 Menu 3 Press the i button. [ ] [W] W Use ac to select the language you want to use. • You can add another language to your camera with the provided OLYMPUS Master software. For details, refer to Help. CANCEL MENU SELECT GO Selecting the video signal type before TV connection This lets you select NTSC or PAL according to your TV's video signal type.
Button timer You can set how long menus are displayed on the screen when setting the functions by using the direct buttons. 1 2 Menu [ [BUTTON TIMER] Use ac to set. [3 SEC] You will have 3 seconds to HOLD complete function setting on the current setting screen. You will have 5 seconds to complete function setting on the current setting screen. You can take as long as you like to complete function setting. The current screen will remain until you press the button again.
Start-up screen You can set the start-up screen to not appear when the camera is turned on. 1 2 3 Menu [ ] [SCREEN] Use ac to select [ON] or [OFF]. Press the i button. Changing monitor color You can switch the colors of the control panel. 1 2 Menu 3 Press the i button. [ ] [CTL PANEL COLOR] Use ac to select [COLOR1] or [COLOR2].
Setting the date/time Date and time information is recorded on the card together with the images. The file No. is also included with the date and time information. Be sure to set the correct date and time before using the camera. 1 2 Menu [ ] [X] Use ac to select one of the following date formats: Y-M-D (Year/Month/Day), MD-Y (Month/Day/Year), D-M-Y (Day/Month/ Year). Then press d. • The following steps show the procedure used when the date and time settings are set to YM-D.
9 Printing Let’s print your shots! You can print your images at photo labs or on your own printer. If you print at photo labs, you'll find the print reservation function helpful. Print reservation allows you to save the number of prints and the date and time information on the card. If you print on a printer, there are a number of different ways to do it. One method is to connect your digital camera to an exclusive printer and print out recorded pictures directly from the camera.
Print reservation (DPOF) < Print reservation allows you to save printing data (the number of prints and the date/time information) with the pictures stored on the card. DPOF is a standard format used to record automatic print information from digital cameras. You can print out pictures automatically, at home or in a photo lab, by storing such data as which pictures you wish to print and the number of prints on a card. Pictures set with print reservation can be printed using the following procedures.
Print reservation (DPOF) Flowchart for print reservation There are two print reservation modes available: single-frame reservation < or all-frame reservation U. Do the following settings on the menu. Menu [q] [<] Follow the operation guide displayed here. g P. 142 Select frames you want to print (only for when you have selected <). g P. 142 Set the printing data. g P. 142 Confirm the print reservation you have set. g P. 143 141 9 Printing Select the print reservation mode.
Print reservation (DPOF) Selecting the print reservation mode < Select whether to apply print reservation to selected pictures or apply print reservation to all the pictures stored on the card. [<] [U] Applies print reservation to selected pictures. Applies print reservation to all the pictures stored in the card. Pictures shot after performing all-frame reservation and stored on the same card will not be printed.
Print reservation (DPOF) Confirming your print setting [SET] Confirms the print reservation you have made. [CANCEL] Cancels the print reservation and the q menu is restored. Resetting print reservation Lets you reset print reservation data. You can reset all print reservation data or just the data for selected pictures. To reset one frame at a time, set 0 for the number of frames in the [Singleframe reservation] procedure.
Print reservation (DPOF) 2) Use bd to select the frame with print reservation data you want to reset, then press c to set the number of prints to 0. • To reset print reservation data of other frames, repeat this step. 3) Press i when you are finished. • The X screen is displayed. 4) Use ac to select [NO], [DATE] or [TIME]. Press i. • This setting is applied to all frames with print reservation data. 5) Use ac to select [SET], then press i. • The setting is saved. • The q menu is restored.
Direct printing (PictBridge) By connecting the camera to a PictBridge-compatible printer with the USB cable, you can print out recorded pictures directly. With the camera connected to the printer, select the pictures you want to print and the number of prints on the camera's monitor. It is also possible to print out pictures using the print reservation data (g P. 140). To find out if your printer is compatible with PictBridge, refer to the printer's instruction manual.
Direct printing (PictBridge) Connecting the camera to a printer Use the USB cable provided to connect the camera to a PictBridge-compatible printer. 1 Turn the printer on and plug the printer end of the USB cable into the printer's USB port. • For details on how to turn the printer on and the position of the USB port, refer to the printer's instruction manual. 2 Plug the USB cable into the camera's multi-connector and turn the camera on.
Direct printing (PictBridge) Easy printing 1 Display the image you want to print and then connect the camera and the printer with the USB cable. g "Connecting the camera to a printer" (P. 146) • The [EASY PRINT START] screen is displayed. 2 Press the (print) button. Flowchart for custom printing Follow the operation guide displayed here. Select the print mode. g P. 148 9 Select the print paper setting. g P. 149 Printing Select frames you want to print. g P. 149 Set the printing data. g P.
Direct printing (PictBridge) Selecting the print mode Select the type of printing (print mode). You can print pictures one by one or multiple pictures on a single sheet of paper. [PRINT] [ALL PRINT] [MULTI PRINT] [ALL INDEX] [PRINT ORDER] Prints selected pictures. Prints all the pictures stored in the card and makes one print for each picture. Prints multiple copies of one image in separate frames on a single sheet. Prints an index of all the pictures stored in the card.
Direct printing (PictBridge) Setting the print paper items This setting varies depending on the type of printer. If only the printer's [< STANDARD] setting is available, you cannot change the setting. [SIZE] [BORDERLESS] [PICS/SHEET] Sets the paper size that the printer supports. Selects whether the picture is printed on the entire page or inside a blank frame. Selects the number of pictures per sheet. Displayed when you have selected [MULTI PRINT].
Direct printing (PictBridge) Setting printing data Select whether to print printing data such as the date and time or file name on the picture when printing. [
Direct printing (PictBridge) If an error code is displayed If an error code is displayed during direct printing setting or printing, see the following table. For more details on solutions, refer to the printer's instruction manual. If other codes are displayed, refer to “Error codes” (P. 168). Monitor indication NO CONNECTION Possible cause Corrective action The camera is not connected to the printer correctly. Disconnect the camera and connect it again correctly. There is no paper in the printer.
10 Transferring images to a computer Transferring images to your computer is a great way to make the most of the potential of digital imaging. Not only can you print the images of your choice, you can also use image processing software to organize, edit, and manipulate images. There are so many things you can do. Sort images by date/ time or other criteria. Trim, crop, colorize, or add special effects. And much more.
Flowchart Just connect the camera to a computer with the USB cable and you can easily transfer images stored on the card to the computer with the provided OLYMPUS Master software. g P. 155 Installing OLYMPUS Master Connecting the camera to the computer using the provided USB cable g P. 159 Starting OLYMPUS Master g P. 161 Saving images in the computer g P. 162 Disconnecting the camera from the computer g P.
Using the provided OLYMPUS Master software Install the OLYMPUS Master software from the provided CD-ROM to edit and manage images on your computer. What is OLYMPUS Master? OLYMPUS Master is an image management program with viewing and editing features for pictures taken with your digital camera. Once installed on your computer, you can take advantage of the following. Viewing images and movies You can also enjoy slideshows and sound playback.
Using the provided OLYMPUS Master software Installing OLYMPUS Master Identify the OS on your computer before installing the software. For the latest information on compatible operating systems, visit the OLYMPUS web site (http://www.olympus.com).
Using the provided OLYMPUS Master software How to install Windows 1 Boot your computer and insert the OLYMPUS Master CD into your CD-ROM drive. • The OLYMPUS Master Setup Menu will automatically launch. • If the menu window does not appear, doubleclick the [My Computer] icon, and click the CD-ROM icon. 2 Click the [OLYMPUS Master] button. • The QuickTime Setup program will automatically run. • QuickTime is required to run OLYMPUS Master.
Using the provided OLYMPUS Master software • When a dialog box prompting you for User Information appears, enter your name and the OLYMPUS Master serial number that is printed on the label on the CD-ROM package. Select your region, then click [Next]. Installation starts. When the DirectX license agreement window appears, read the message, then click [Yes] to continue installation. • A confirmation window appears, asking you if you want to install Adobe Reader.
Using the provided OLYMPUS Master software Macintosh 1 Insert the OLYMPUS Master software CD into your CD-ROM drive. • The CD-ROM window automatically appears. • If the screen does not appear, double-click the CD-ROM icon on your desktop. 2 Double-click on the desired language folder. 3 Double-click the [Installer] icon. • Follow the on-screen prompts to continue installing the program. OLYMPUS Master Installer will automatically launch.
Connecting the camera to a computer Connect the camera to your computer with the provided USB cable. 1 Insert the marked end of the provided USB cable into the USB port on your computer. • The location of the USB port varies depending on the computer. For details, refer to your computer's manual. 2 Insert the provided USB cable into the multi-connector. 3 Set the camera's power switch to ON. Look for this mark.
Connecting the camera to a computer 5 The computer recognizes the camera as a new device. • Windows When you connect the camera to the computer for the first time, the computer automatically recognizes the camera. Click [OK] when the message saying that the installation is completed appears. The computer recognizes the camera as a [Removable Disk ]. • Macintosh iPhoto is the default image management application for Mac OS.
Starting OLYMPUS Master Windows 1 Double-click (OLYMPUS Master) on the desktop. • The OLYMPUS Master main menu appears. Macintosh 1 Double-click (OLYMPUS Master) in the [OLYMPUS Master] folder. • The OLYMPUS Master main menu appears. • The first time you start the program, a dialog box appears, prompting you for User Information. Enter your name and the OLYMPUS Master serial number that is printed on the affixed label, then select your region.
Displaying the camera’s images on your computer Downloading images to save on your computer Save images downloaded from the camera on your computer. 1 Click (Transfer Images) in the OLYMPUS Master main menu. • The selection menu for the folders containing the files to be copied appears. 2 Click (From Camera). • The window containing the files to be copied appears. The thumbnails of all the images in the camera appear.
Displaying the camera’s images on your computer Disconnecting the camera from your computer After downloading images from the camera to your computer, you can disconnect the camera from your computer. 1 Make sure that the card access lamp has stopped blinking. 2 Do the following steps depending on your computer's operating system. Card access lamp Windows 98SE 1) Double-click the [My Computer] icon and right-click the [Removable Disk] to display the menu. 2) Click [Eject] on the menu.
Viewing still images Macintosh 1) The trash icon changes to the eject icon when the “Untitled” or “NO_NAME” icon on the desktop is dragged. Drag and drop it on the eject icon. 3 Unplug the USB cable from the camera. Notes • For Windows Me/2000/XP users: When you click [Unplug or Eject Hardware], a warning message may be displayed. In such case, make sure that no image data is being downloaded from the camera, and that there are no applications open that were accessing the camera image files.
Printing images The print menus include menus such as [Photo], [Index], [Postcard], [Calendar] etc. The examples in the instructions below are taken from the [Photo] menu. 1 Click (Print Images at Home) in the OLYMPUS Master main menu. • The print menu appears. 2 Click (Photo). • The photo print window appears. 3 Click (Settings) on the photo print window. • The printer setting dialog box appears. Make printer settings as required. 4 Select the layout and size of the image to print.
Transferring images to your computer without using OLYMPUS Master Your camera supports the USB Mass Storage Class. You can transfer images to a computer by connecting the camera to the computer with the provided USB cable. This can be done even without using OLYMPUS Master. The following operating systems are compatible with the USB connection: Windows Macintosh : Windows 98SE/Me/2000 Professional/XP : Mac OS 9.0-9.2/X Notes • Users running Windows 98SE need to install the USB driver.
11 Appendix The appendix will assist in solving most problems you may encounter. Solutions to error messages, operational problems, blurry pictures, camera storage, basic terminology and more can easily be found in this section.
If you encounter problems Error codes Viewfinder Monitor indications indications Normal indication Possible cause The card is not inserted, or it Insert a card or insert a cannot be recognized. different card. NO CARD There is a problem with the card. Insert the card again. If the problem persists, format the card. If the card cannot be formatted, it cannot be used. Writing to the card is prohibited. The card has been set to read-only setting with the computer. Reset the card with the computer.
If you encounter problems Viewfinder Monitor indications indications Possible cause Corrective action The card is not formatted. Format the card. The battery is drained. Charge the battery. CARD ERROR No indication BATTERY EMPTY Troubleshooting Possible cause Corrective action Ref. Page The camera does not turn on or function buttons do not respond. – The power is off. The camera automatically turns off if it is not operated for a certain period of time. Set the power switch to ON.
If you encounter problems Possible cause Corrective action Ref. Page No picture is taken when the shutter button is pressed. The battery is drained. Charge the rechargeable battery. When you use lithium batteries, replace with new ones. – Subjects are difficult to focus on (AF does not work properly). Use manual focus or focus lock to focus on the subject and then shoot. P. 27 P. 73 Pictures are being recorded to the card.
If you encounter problems Possible cause Corrective action Ref. Page Turning the camera's power off does not reset the stored settings. This camera retains the saved settings after the camera's power is turned off. Turning the camera's power off does not reset the saved settings. Set [CUSTOM RESET SETTING] to [RESET], then turn off the camera. P. 118 The picture is out of focus. The subject is too close. Move back to the closest focusing distance for the lens and take the picture.
If you encounter problems Possible cause Corrective action Ref. Page There was something dark in the center of the image. When there is something dark in the center of the image, the edges of the image will be brighter regardless of the metering system. Adjust the exposure toward minus (-). P. 79 The ISO setting is high. Set ISO to auto or 100. If there is no improvement, use a commercially available ND filter compatible with the lens. P. 82 A low aperture value is set in the A (M) mode.
If you encounter problems Possible cause Corrective action Ref. Page The top left part of the picture appears too bright. When shooting at slow shutter speeds, noise may be generated due to a rise in temperature in the CCD drive circuit. Set [NOISE REDUCTION] to [ON] before taking pictures. P. 95 Pictures cannot be played back on the monitor. Pictures are not stored on the card. “NO PICTURE” appears on the monitor. Record pictures. The card error occurs. Refer to the error messages. – P.
Camera maintenance Cleaning and storing the camera Cleaning the camera Turn off the camera and remove the battery before cleaning the camera. Exterior: J Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used the camera at the beach, use a cloth soaked in clean water and well wrung. Monitor and viewfinder: J Wipe gently with a soft cloth.
Camera maintenance Cleaning mode — Removing dust on the CCD If dust or dirt gets on tshe CCD, black dots may appear in the picture. If this happens, contact your Olympus Authorized Service Center to have the CCD physically cleaned. The CCD is a precision device and is easily damaged. When cleaning the CCD yourself, be sure to follow the instructions below. If a battery is used and power runs out during cleaning, the shutter will close, which may cause the shutter curtain and mirror to break.
Camera maintenance Pixel mapping — Checking the image processing functions The pixel mapping feature allows the camera to check and adjust the CCD and image processing functions. It is not necessary to operate this function frequently. Approximately once a year is recommended. After using the monitor or taking continuous shots, wait for at least one minute before using the pixel mapping function to ensure that it operates correctly. 1 2 Menu [ ] [PIXEL MAPPING] Press d, then press the i button.
Glossary A (Aperture Priority) Mode You set the aperture yourself and the camera automatically varies the shutter speed so that the picture is taken with the correct exposure. AE (Automatic Exposure) The camera's built-in exposure meter automatically sets the exposure.
Glossary Color temperature The spectral balance of different white light sources is rated numerically by color temperature — a concept of theoretical physics that, with incandescent lighting, corresponds roughly to the absolute lamp filament temperature, expressed on the Kelvin (K) temperature scale. The higher the color temperature, the richer the light in bluish tones and the poorer in reddish; the lower the color temperature, the richer the light in reddish tones and the poorer in bluish.
Glossary Eclipsing (Vignetting) This refers to when an object obscures part of the field of view so that the whole subject is not photographed. Vignetting also refers to when the image seen through the viewfinder does not exactly match the image shot through the objective lens, so the photographed image includes objects not seen through the viewfinder. In addition, vignetting can occur when an incorrect lens hood is used, causing shadowing to appear in the corners of the image.
Glossary P (Program) Mode Also called Program AE mode. The camera automatically sets the best shutter speed and aperture for the shot. PictBridge A standard that enables digital cameras and printers made by different manufacturers to be connected, and also allows pictures to be printed directly from the camera. Pixels A pixel is the smallest unit (dot) used to make up an image. Clear large-sized printed images require millions of pixels.
Glossary Spot metering The meter reading is taken from a very small area around the center of the subject, defined by the spot metering area mark in the viewfinder. Spot metering is ideal for use in difficult light conditions, or when the important element of the picture (subject's face) is small. Use spot metering for backlit subjects, or sports and stage performers. See also digital ESP metering and center weighted averaging metering.
12 Information This chapter covers all the camera's functions already described in Chapters 1 through 11. You can refer to the names of the camera's buttons and parts, the names and meanings of the icons displayed on the monitor, and the menu lists as necessary. Use the index when you want to find the pages describing the functions and items if these are not included in the table of contents. You can also use the "Names of parts" and "Menu directory" to search for the relevant pages.
Menu directory Shooting Menu Tab Function CARD SETUP CUSTOM RESET SETTING PICTURE MODE GRADATION D Setting ALL ERASE / FORMAT RESET RESET1 SET / RESET RESET2 SET / RESET NATURAL / MUTED / VIVID / MONOTONE / SEPIA HIGH KEY / NORMAL / LOW KEY HQ / SQ / RAW+SHQ / RAW+HQ / RAW+SQ / RAW / TIFF / SHQ Ref. Page P. 26 P. 115 P. 118 P. 93 P. 94 P. 30 F -5.0 - 0.0 - +5.0 P. 79 NOISE REDUCTION OFF P. 95 / ON AUTO 5 5300K 3 6000K 2 7500K WB 1 3000K w 4000K x 4500K y 6600K CWB ISO AUTO / 100 - 1600 P.
Menu directory Tab Function Setting Ref. Page FLASH MODE P / A / i / & / l / j / /: AUTO / ! / # / $ / !SLOW / #SLOW / #SLOW2 / #FULL / #1/4 / #1/16 / #1/64 S/M: # / H / $ / #SLOW2 / #FULL / #1/4 / #1/16 / #1/64 w -2.0 - 0.0 - +2.0 P. 56 P. 62 Y/
Menu directory Custom menu Tab Function ISO STEP ISO BOOST ISO LIMIT EV STEP ALL > HQ SQ Setting 1/3EV / 1EV OFF / ON+NF / ON OFF / 100 / 200 / 400 / 800 1/3EV / 1/2EV / 1EV B7 - ±0 - R7 ALL SET G7 - ±0 - M7 ALL RESET YES / NO P. 125 P. 30 1/4 / 1/8 / 1/12 PIXEL COUNT Ref. Page P. 124 P. 124 P. 124 P. 123 3200×2400 / 2560×1920 / 1600×1200 / 1280×960 / 1024×768 / 640×480 P. 30 COMPRESSION 1/2.7 / 1/4 / 1/8 / 1/12 P. 125 MANUAL FLASH OFF / ON w+F OFF / ON P.
Menu directory Setup menu Tab Function X CF/xD FILE NAME EDIT FILENAME s W VIDEO OUT 8 REC VIEW SLEEP 4h TIMER BUTTON TIMER SCREEN CTL PANEL COLOR PRIORITY SET USB MODE COLOR SPACE SHADING COMP.
AUTO Available functions by shooting mode Function P Aperture value – – Shutter speed – – Bulb shooting – A S M il& j/ – – – – – – F – – K Flash mode Flash shooting – AUTO – *1 – ! – *1 – !SLOW – #SLOW – H – – – – #SLOW2 – – – *1 # – $ – CUSTOM RESET SETTING – – PICTURE MODE – GRADATION – NOISE REDUCTION – WB – WB Compensation – ISO – w – METERING – j –*2 12 Y AF mode – *3 AF target mark AE BKT – WB BKT – FL BKT – MF BKT : A
AUTO Available functions by shooting mode Function P A S M il& j/ ANTI-SHOCK – ISO STEP – ISO BOOST – ISO LIMIT – EV STEP – ALL > – HQ SQ MANUAL FLASH – w+F – #X-SYNC – AUTO POP UP DIAL AEL/AFL – AEL/AFL MEMO – AEL METERING – QUICK ERASE RAW+JPEG ERASE V FUNCTION – MY MODE SETUP – FOCOUS RING AF ILLUMINATOR – RESET LENS 12 RELEASE PRIORITY S – RELEASE PRIORITY C – X CF / xD Information FILE NAME EDIT FILENAME s W VIDEO OUT 8 REC VIEW SLEEP : Available 188 – :
AUTO Available functions by shooting mode Function P A S M il& j/ 4h TIMER BUTTON TIMER SCREEN CTL PANEL COLOR PRIORITY SET USB MODE COLOR SPACE – SHADING COMP.
Names of parts Camera AEL/AFL button g P. 81 0 (Protect) button g P. 114 Viewfinder Diopter adjustment dial #(Flash) switch g P. 55
Names of parts Mode dial g P. 18 Hot shoe g P. 58 Control dial g P. 21, P. 127 Power switch F (Exposure compensation) button g P. 79 Shutter button g P. 27 SSWF indicator g P. 174 Flash g P. 55 Self-timer/Remote control lamp/ Remote control receiver g P. 66 Mirror Lens attachment mark Lens release button Lens lock pin Mount (Attach the lens after removing the body cap from the camera to prevent dust and dirt from entering the camera body.
Names of parts Viewfinder indications Items 12 Indication examples Ref. page Information 1 AF frame 2 Aperture value P. 41 - 45 3 Shutter speed P. 42 - 45 4 AF confirmation mark 5 Flash P. 55 6 White balance P. 87 7 AE lock P. 81 8 Exposure compensation value indication (appears during exposure compensation) P. 79 9 Metering mode 10 Battery check 11 Exposure mode 192 P. 69 ( P. 28 , 4, 5 P. 77 (blinks) P, %, A, S, M – P.
Names of parts Monitor indications (only for playback) You can switch the monitor display using the INFO (information display) button g "Information display" (P. 103). 1 2 3 1 4 2 8 9 5 5 10 11 12 15 16 6 13 14 17 7 18 Single-frame playback information 20 21 19 Overall information . Items Indication examples Ref. page 1 Battery check 2 Card – 3 Print reservation Number of prints 4 Protect 5 Record mode RAW, TIFF, SHQ, HQ, SQ P. 31 6 Date and time 05.12. 23, 21:56 P.
Names of parts Control panel screen 1 2 3 4 1 5 7 8 13 1415 16 6 3 10 20 17 21 22 Normal 13 16 Detailed Items 12 4 19 10 12 2 5 8 6 9 11 18 Indication examples Ref. page 1 Battery check 2 Shutter speed 3 Exposure compensation indicator Exposure level indicator Flash intensity level indicator 4 Aperture value F2.8 5 Exposure mode AUTO, P, A, S, M, i, l, &, j, / 6 Exposure compensation +2.0 P. 79 ’05.12.23, 21:56 7 Date/Time Auto bracketing Noise reduction P.
Names of parts Items Indication examples Super FP flash 18 Noise reduction White balance 19 White balance compensation Ref. page P. 60 P. 95 1, 5 P. 87 R+3, G-2 P. 91 Flash mode Flash intensity control Metering mode Focus mode 20 AF frame Self-timer/Remote control/ Drive Auto bracketing AF illuminator H #+2.0 , 4, 5 S-AF P. 53 P. 56 P. 77 P. 70 P. 69 <, Y2S, j P. 62 - 65 Color space Sharpness 21 Contrast Saturation Gradation sRGB, Adobe RGB N+2 J+2 T+2 , H, L P. 96 P. 93 P. 93 P. 93 P.
Information Specifications Product type Product type : Single-lens reflex digital camera with interchangeable lens system Lens : Zuiko Digital, Four Thirds System Lens Lens mount : Four Thirds mount Equivalent focal length on a 35 mm film camera : Approx. twice the focal length of the lens Image pickup element Product type Total no. of pixels No. of effective pixels Screen size Aspect ratio : : : : : 4/3 type full frame transfer primary color CCD Approx. 8,880,000 pixels Approx. 8,000,000 pixels 17.
Information Exposure mode : (1) AUTO: Full auto (2) P: Program AE (Program shift can be performed) (3) A: Aperture priority AE (4) S: Shutter priority AE (5) M: Manual ISO sensitivity : 100 - 400 (High ISO values (400 - 1600) are available) Exposure compensation : Exposure can be adjusted in 1/3, 1/2 or 1 EV step within a range of ± 5 EV.
13 Accessories This chapter describes how to use the accessories provided with your digital camera. Provided accessories may differ depending on the camera kit. Although most accessories are optionally available, not all accessories are available in some areas. • BLM-1 Li-ion Battery / BCM-2 Li-ion Battery Charger • LBH-1 Lithium Battery Holder • ZUIKO DIGITAL interchangeable lenses ZUIKO DIGITAL 14-45mm f3.5-5.6 ZUIKO DIGITAL 17.5-45mm f3.5-5.
BLM-1 Li-ion Battery / BCM-2 Li-ion Battery Charger Charging the battery 1 2 Connect the power cord firmly to the battery charger. Remove the protection cap and slide the battery into the charger as illustrated. –Terminal +Terminal 3 Connect the other end of the power cord firmly to a power outlet.
BLM-1 Li-ion Battery / BCM-2 Li-ion Battery Charger 4 The charging indicator lights up and charging starts. Charging is completed when the indicator turns green. When charging is completed, unplug the power cord from the power outlet and then remove the battery from the battery charger. Charging indicator status Charging status Off Battery is not connected. Red lighting Charging. Green lighting Charging completed. Red blinking Charging error (time-out, temperature error).
BLM-1 Li-ion Battery / BCM-2 Li-ion Battery Charger z Do not short-circuit the battery terminals with a metallic object. When transporting or storing the battery, cover the battery terminals with the provided protection cap. It is dangerous to carry an uncapped battery in a bag, pocket, etc. z Do not attempt to charge a battery that is damaged, leaking, or wet. z If battery fluid gets in your eyes, blindness may result. Rinse your eyes with clean water without rubbing them and see a doctor immediately.
BLM-1 Li-ion Battery / BCM-2 Li-ion Battery Charger WARNING z To avoid fire, overheating, explosion or leakage, do not subject the battery to excessive shock, throw it, or otherwise damage it. z Never put the battery in a microwave oven or high-pressure container. This could cause a fire, leakage, overheating or an explosion. z If the battery leaks or emits a burning odor, keep it away from heat sources. Leaked fluid may catch fire, causing the battery to smoke, burn or explode.
BLM-1 Li-ion Battery / BCM-2 Li-ion Battery Charger z If charging does not complete although 10 hours have elapsed after the specified charge time, stop charging to avoid fire, overheating or explosion. In this case, contact Olympus Service Center. z The battery gets hot after extended use in a camera. To prevent burns, do not remove the battery from the camera immediately after use. z Do not place the battery on an unstable surface such as a tilted or unsteady table.
BLM-1 Li-ion Battery / BCM-2 Li-ion Battery Charger Operating temperatures • Use the battery within the operating temperature range specified for the camera. • Even within the specified operating temperature range, battery operation time decreases as the temperature drops. When the temperature is low, it is recommended to carry a spare charged battery and keep it warm in a pocket, bag, etc.
BLM-1 Li-ion Battery / BCM-2 Li-ion Battery Charger Overseas use • To use the charger in another country, you may need a conversion plug that matches the design of the power outlets in that country. To find out what type of conversion plug or adapter is required, please consult a travel agent. Do not use an electronic transformer (travel converter) as this will cause malfunction.
How to use the LBH-1 Lithium Battery Holder You will need three CR123A Lithium batteries (commercially available). 1 Remove the battery holder from its case. 2 Remove the holder cover while holding down the section indicated by the arrow in the illustration. 3 Insert the batteries into the battery holder in the direction shown in the illustration. 4 Attach the holder cover to the battery holder as illustrated.
How to use the LBH-1 Lithium Battery Holder • When carrying the battery holder with batteries loaded, be sure to put the battery holder in the provided case to prevent possible contact with other metallic objects that could cause short-circuiting. Also, make sure that no metal gets in between the batteries in the holder. • Never heat the battery holder, put it in fire, or expose it to water or moisture. Doing so may cause fire or explosion.
ZUIKO DIGITAL interchangeable lenses Safety precautions Do not view the sun through the lens. Do not point the camera lens at the sun. Sunlight will converge in the lens and focus inside the camera, possibly causing a malfunction or fire. Do not leave the lens without the cap. If solar light is converged through the lens, a fire may result. Working temperature range Abrupt temperature changes Do not put the lens with its contacts facing down. Too much pressure Do not touch the lens.
ZUIKO DIGITAL interchangeable lenses Do not touch the contacts. Do not drop Organic solvents Excessive moisture Magnetism Do not hold the camera by the section of the lens extruded by the focusing operation. Storage Precautions Lens cleaning tissue or soft cloth M o th Cap the lens when it is not used. Lens cleaning b a ll s Moth repellents 13 Accessories If you experience any problems, contact your nearest Olympus Service Center.
ZUIKO DIGITAL interchangeable lenses ZUIKO DIGITAL 14-45mm f3.5-5.6 Main features • The 14-45mm is a lens with high imaging capability, designed exclusively for use with Olympus FOUR THIRDS single-lens-reflex digital cameras. • Standard zoom lens equivalent to a 28-90 mm zoom lens on a 35 mm film camera. • Zoom lens with 12 elements in 10 groups including two aspherical elements. Lens configuration • Can be used with the optional EC-14 teleconverter in manual focusing (MF) mode.
ZUIKO DIGITAL interchangeable lenses Attaching the hood Use the hood when shooting a backlit subject. Storing the hood Main Specifications Mount Focal distance Max. aperture Image angle Lens configuration : : : : : Iris control Shooting range Focus adjustment Weight Dimensions Lens hood mount Filter mount thread diameter : : : : : : : Four Thirds Mount 14 - 45mm f3.5 - 5.6 75° - 27° 10 groups, 12 lenses Multilayer film coating (partially single layered) f3.5 - f22 0.38m (1.
ZUIKO DIGITAL interchangeable lenses ZUIKO DIGITAL 17.5-45mm f3.5-5.6 Main features • The 17.5-45mm is a lens with high imaging capability, designed exclusively for use with Olympus FOUR THIRDS single-lens-reflex digital cameras. • Standard zoom lens equivalent to a 35 90 mm zoom lens on a 35 mm film camera. • Zoom lens with 7 elements in 7 groups including two aspherical elements. • Can be used with the optional EC-14 teleconverter in manual focusing (MF) mode.
ZUIKO DIGITAL interchangeable lenses Nomenclature 1 2 3 4 5 6 7 7 Rear cap Filter mount thread Zoom ring Focus ring Mount index Electrical contacts Front cap 2 4 3 5 1 Hold down the exterior part of the filter mount thread when mounting the filter on the lens. 6 Main Specifications Mount Focal distance Max. aperture Image angle Lens configuration Iris control Shooting range Focus adjustment Weight Dimensions Filter mount thread diameter : : : : : : : : : : : Four Thirds Mount 17.5 - 45mm f3.
Index w+F ............................................................ 56 (AF frame selection) ................................ 69 8 (Beep sound) .......................................... 133 4 (Center weighted averaging metering)..... 78 < CUSTOM........................................ 134, 146 (Custom menu) ........................................ 185 X (Date/time setting) ................................. 138 (Digital ESP metering) ............................ 78 < EASY..................................
Index I Index display................................................. 101 ISO ................................................................. 82 ISO BOOST.................................................. 124 ISO LIMIT ..................................................... 124 ISO STEP ..................................................... 124 RAW+JPEG ERASE..................................... 130 REC VIEW .................................................... 132 REDEYE FIX ..............................
http://www.olympus.com/ Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo, Japan Two Corporate Center Drive, P.O. Box 9058, Melville, NY 11747-9058, U.S.A. Tel. 1-631-844-5000 Technical Support (USA) 24/7 online automated help: http://www.olympusamerica.com/E1 Phone customer support: Tel. 1-800-260-1625 (Toll-free) Our phone customer support is available from 8 am to 10 pm (Monday to Friday) ET E-Mail: e-slrpro@olympusamerica.com Olympus software updates can be obtained at: http://www.