User Manual

ManualsBrandsOlympus ManualsDigital CamerasOlympus - OM-D E-M1 Mark II Mirrorless Camera with 12-200mm Lens - Black

100

Menu functions (Custom menus)

S Button/Dial/Lever

Option Description

Button Function Choose the function assigned to the selected button.

[UFunction], [VFunction], [RFunction],

[tFunction], [YFunction], [ZFunction], [IFunction],

[GFunction], [nFunction], [mFunction],

[nFunction], [lFunction]

103

Dial Function You can change the functions assigned to the rear dial and

front dial.

—

Dial Direction Choose the direction in which the dial is rotated to adjust

shutter speed or aperture. Change the program shift

direction.

—

Mode Dial

Function

Customize the shooting mode set by the mode dial. You can

apply saved Myset settings. [Myset1] - [Myset4] (P. 79) can be

selected when the settings are registered.

—

t Lever

Function

You can use the positioning of the lever to change the

function of the dials and button.

105

u +v

Choose [On] to assign buttons different roles according to

the position of the lever. With the lever in Position 2, the

AFm button can be used to adjust ﬂ ash settings and the

jYHDR button bracketing settings.

52, 82

T Release/j

Option Description

Rls Priority S If [On] is selected, the shutter can be released even when

the camera is not in focus. This option can be set separately

for S-AF (P. 75) and C-AF (P. 75) modes.

—

Rls Priority C

j L fps

Choose the frame advance rates for [S] and [T]. Figures

are the approximate maximums.

j H fps

j Image

Stabilization

When set to [On], the image stablizer will turn on for

sequential shooting.

—

Half Way Rls

With IS

If set to [On], image stabilization operates when you press

shutter button halfway.

—

Lens I.S. Priority If [On] is selected, priority is given to the lens function

operation when using a lens with an image stabilization

function.

—

Release Lag-Time If [Short] is selected, the time lag between fully pressing the

shutter button and the shot being taken can be shortened.*

—

* This will shorten the battery life. Also make sure that the camera is not subject to sharp

impacts while in use. Such impacts may cause the monitor to stop displaying subjects. If

this happens, turn the power off and on again.