Manual

Preparing the camera and ﬂ ow of operations

Power on

Press the ON/OFF button to turn on the camera.

• When the camera is turned on, the (blue) power lamp will light and the monitor will

turn on.

• To turn off the power, press the ON/OFF button again.

250250 F5.6

01:02:0301:02:03

3838

ISO-A

200

 ON/OFF button

 Monitor

Battery level

7 (green): Camera ready to shoot.

Displayed for about 10 seconds

after the camera is turned on.

8 (green): Low battery

9 (blinks red): Charge the battery.

Number of storable still pictures

Available recording time

Using the monitor

You can adjust the angle of

the monitor.

When set to the angle to take your

own picture, the monitor display up/

down direction inverts.

Camera sleep operation

If no operations are performed for a minute, the camera enters “sleep” (stand-by) mode to

turn off the monitor and to cancel all actions. The camera activates again when you touch

any button (the shutter button, q button, etc.). The camera will turn off automatically if

left in sleep mode for 5 minutes. Turn the camera on again before use.