Owner's Manual

Flash shooting

Basic shooting functions

1 Press d#.

• The flash mode settings screen is displayed.

g“How to use the direct buttons” (P. 13)

2 Select a flash mode, and press Z.

3 Press the shutter button halfway.

• In conditions where the flash will fire, #

lights (flash stand-by).

4 Press the shutter button fully to

take the picture.

TIPS

The # (flash charge) mark blinks.

→ The flash is charging. Wait until # turns off.

Note

• The flash does not fire in the following situations:

Sequential shooting, super macro or panorama.

• The flash may not give you the optimum result in macro mode with the zoom

set to wide-angle (W). Check the resulting picture on the monitor.

FLASH MODE

SELECT

The flash fires automatically

in low light.

AUTO

2816

2112

# mark