Instruction Manual

Chapter 4 Basic operations

CAUTION

• If the USB connector is wet, wait until it is thoroughly dry before connecting the USB Flash

Drive.

• If there is foreign matter inside the USB connector, remove all of it before connecting the

USB Flash Drive.

• Never connect any other USB device to the USB connector except for the USB Flash Drive

provided as standard or USB Flash Drive recommended by Olympus.

NOTE

• To remove the USB Flash Drive, slide the ejector in the direction indicated by the arrow and

then pull out the card.

2 Setup of the image recording format

To record the date, time, title, logo, and other on-screen information onto the

image being recorded, press the control unit [VIEW/MENU] button for at least 2

seconds (long push) while a live screen is displayed to display the menu. Select

“ON” for the “PRINT SCREEN ON/OFF” setting (page 57).

NOTE

• Recording a still image while “ON” is selected for the “Print Screen ON/OFF” setting records

only still images on which the date, time, title logo, and other on-screen information is

recorded. Replaying a still image that has the date, title, and other information recorded on it

may result in overlapping of some text. This is not a malfunction.

Ejector