INSTRUCTIONS Before using your IS-3DLX, read this manual carefully to ensure correct use. We recommend that you take test shots to get accustomed to your IS-3DLX before taking important photographs.
Thank you for purchasing the Olympus IS-3DLX. MAIN FEATURES Built-in 35mm ~ 180mm approx. 5X zoom lens for increased shooting range. Powerful built-in, dual-element intelligent flash system rated at GN 28 (ISO100·m)/GN 92 (ISO100·ft), for telephoto and GN 20 (ISO100·m)/GN 66 (ISO100·ft), for wide angle, corresponding to distant subjects and zoom shooting with high magnification and assuring beautiful pictures.
PREPARATIONS BASIC OPERATIONS ADDITIONAL FUNCTIONS TAKING BETTER PICTURES CAMERA MAINTENANCE Names and functions of parts ......... 4 Viewfinder display/LCD panel ......... 6 Attaching the strap ........................ 7 Outline of operations ................ 8 Loading the batteries ......................10 Checking the batteries ................ 11 Points to remember .................... 12 Reset operation ............................. 14 Loading the film ........................................
NAMES AND FUNCTIONS OF PARTS Remote control sensor (rear) Hot shoe cover PREPARATIONS Shutter release button Shift dial Selects the flash, exposure and drive modes. (The same operation can also be performed with the shift buttons in the rear.) Selects the shutter speed. Remote control sensor (front) AF illuminator Also blinks when the selftimer is activated. Power ON/OFF switch Selftimer/remote control button Flash Flash release (See p. 23.) Strap attachment stud Zoom (T/W) buttons (See p. 18.
Viewfinder (See p. 6.) Spot button (See p. 53.) Film window Exposure mode button For confirmation of +/- button film ISO speed Drive mode button Back cover release Flash mode button Mid-roll rewind button Date MODE, SET and ADJUST buttons Tripod socket Battery compartment cover Shift buttons Select the flash, exposure and drive modes. (The same operation can also be performed using the shift dial in the front) Select the aperture setting.
VIEWFINDER DISPLAY/LCD PANEL VIEWFINDER DISPLAY Spot frame Autofocus frame Flash Panorama marks* *Optional IS/L PANORAMA ADAPTER is required Autofocus Macro Shutter speed Aperture setting Spot metering Exposure compensation/ Manual exposure LCD PANEL Exposure modes: Program auto-exposure/ ESP light metering Aperture-preferred auto-exposure Shutter-speed-preferred auto-exposure Manual exposure Sports Portrait Landscape Night scene Drive modes: Single-frame advance Continuous-frame advance 6 Double ex
ATTACHING THE STRAP 7
OUTLINE OF OPERATIONS Basic Shooting Procedures 8 Load the batteries (p. 10). Open the back cover (p. 15). Load the film (p. 15). Press the zoom buttons to determine the composition (p. 18). Place the autofocus frame on the subject you want to focus on (p. 19). Depress the shutter release button halfway, making sure the autofocus indicator in the viewfinder lights and the autofocus beep is heard (p. 20).
Close the back cover (p. 17). Turn the power switch ON (p. 17). Make sure the exposure counter on the LCD panel reads " " (p. 17). Depress the shutter release When the film reaches the end, it will automatically rewind (p. 21). Open the back cover to remove button fully to take a picture (p. 20). the rewound film (p. 21).
LOADING THE BATTERIES Use two 3V lithium batteries (CR123A or DL123A). Turn the lock screw on the bottom of the camera counterclockwise to open the battery cover. 10 The types of batteries that can be used are also shown inside the battery cover. When replacing the batteries, make sure to turn the power switch OFF before unloading the batteries. Insert the batteries as shown and replace the cover, turning the lock screw clockwise. Read "Battery Handling" on page 80.
CHECKING THE BATTERIES Turn the power switch ON. Press the exposure mode and +/buttons simultaneously to check the batteries. Batteries are OK. The mark disappears when the finger is released from the button. Blinks Lights Batteries are low. Have spares handy. Batteries should be replaced immediately.
POINTS TO REMEMBER Hold the Camera Correctly. Correct. Correct. Note: As the focal length becomes larger, shaking the camera becomes more noticeable. Hold the camera firmly with both hands while keeping elbows at sides to prevent the camera from shaking. 12 Incorrect. Caution: Keep your fingers away from the lens, AF illuminator and flash.
Proper Shutter Release. Practice before loading the film. Keep the shutter Depress the shutter release release button Cautions: depressed halfway. button fully. Press the shutter release button gently. Avoid shaking the camera when pressing the shutter release button to prevent blurry pictures. To lock the focus. Make sure The image is clear, the autofocus beep is heard, and the autofocus indicator lights in the viewfinder. To release the shutter and take the picture.
RESET OPERATION Reset operation restores the standard shooting mode, for worry-free photography that anyone can perform. Also use this mode when you don't know what operation to perform. Press the exposure mode and +/- buttons simultaneously.
LOADING THE FILM Shutter curtains Push in the film cartridge until it clicks. BASIC OPERATIONS Slide the back cover release upward to open the back cover. Note: Use DX-coded film. Caution: Do not touch the shutter curtain, and do not press it with the edge of film.
Pass the edge of the film under the film guide, and align the film leader with the film loading indicator. Film loading indicator Film guide Note: Make sure the film is lying flat. If not, push the cartridge down.
Close the back cover. Turn the power switch ON. Make sure The film automatically advances to the first frame. The exposure counter on the LCD panel reads . Note: If blinks in the exposure counter, reload the film.
TAKING PICTURES Follow the procedure here to cover ordinary photography. Remove the lens cap, and turn the power switch ON. Make sure The lens advances, and the LCD panel lights. Note: If no operation is made for approx. 30 seconds, the LCD panel goes out and will come on again when the operation is resumed. 18 While looking through the viewfinder, press the zoom button to determine the composition. There are two zoom speeds. Press the zoom button halfway for slow zooming and fully for fast zooming.
How to Use the Zoom Buttons Telephoto: Press the Position the autofocus frame on your subject. button to zoom in. Max. telephoto focal length: 180mm Wide-angle: Press the button to zoom out. Max.
Depress the shutter release button halfway. Make sure The autofocus beep is heard and the autofocus indicator lights when the subject is in focus. It will blink if the subject is difficult for the autofocus to lock on, and when the subject is too close. Note: When the autofocus indicator blinks, the shutter won't release. (See p. 70.) 20 Depress the shutter release button fully to take the picture. The shutter releases and the film automatically advances to the next frame.
UNLOADING THE FILM The camera automatically rewinds the film when you reach the end of a roll. Make sure the motor has stopped Rewinding the film before and the E is blinking on the LCD the end of the roll panel, before opening the back cover and removing the film. If the power is turned OFF while rewinding, operations will stop. Rewind mode, however, is not canceled. Rewinding will continue when the power switch is turned ON again.
USING THE FOCUS LOCK ADDITIONAL FUNCTIONS When the main subject is not in the center of the Autofocus frame, use the focus lock. Reposition your subjects in the Position the autofocus picture frame while keeping frame on your subject and the shutter release button press the shutter release depressed halfway. Then press button halfway. the shutter release button fully. Make sure Autofocus frame The autofocus beep is heard, and the autofocus indicator lights in the viewfinder.
FLASH PHOTOGRAPHY This camera has two flash tubes that are automatically selected and fired according to the shooting conditions. There are also various flash modes that can be selected to match your needs. How to Select the Flash Mode Flash Modes Mode Function Automatically fires in low-light conditions. Slide the flash release to flip up the flash. (p. 26) Significantly reduces the phenomenon of "red-eye" (when a subject's eyes appear red). (p. 28) Fires regardless of available light. (p.
Press the flash button. The available modes appear, and blinks on the left of the mode currently engaged.
Release the flash button to engage the mode. Make sure is blinking on the left of the selected flash mode. Make sure disappears, and the engaged flash mode remains on the LCD panel.
Auto Flash AUTO The flash fires automatically when there is insufficient light. When blinks in the viewfinder, the flash should be used. Slide the flash release. When the flash is flipped up, the camera will start recharging the flash. Make sure AUTO lights on the LCD panel. When the flash is recharged, in the viewfinder will light. Note: The flash won't fire until recharging is finished.
Press the shutter release button. Auto Flash Range* (with color negative film) Focal length 35mm 180mm ISO 100 6.3 m (20.7 ft) 7 m (23 ft) ISO 200 8.9 m (29.2 ft) 9.8m (32.2ft) ISO 400 12.6m (41. 3 ft) 14 m (45.9 ft) * The Auto Flash mode can be combined with the Macro mode. Note: The shutter speed is automatically set at 1/100-sec. when the flash fires. If the subject requires a faster shutter speed, the flash won't fire.
Red-Eye Reducing Flash AUTO-S Approximately 20 pre-flashes are emitted before the main flash fires, significantly reducing the phenomenon of "red-eye" (when a subject's eyes appear red). This mode is the same as Auto Flash except for the pre-flashes. Flip up the flash, and select the Auto-S mode. Press the shutter release button. Notes: The pre-flashes are not emitted in the Sports mode. After pressing the shutter release button, hold the camera securely until the shutter has been released.
Forced Activation FILL-IN In this mode, the flash always fires. Even in backlighting, both the subject and background can be shot clearly. And portraits look lively by reflecting light into the subject's eyes. Make sure the exposure mode is set to P (program). In exposure modes other than Program, the FILL-IN Flash mode cannot be engaged. Flip up the flash, and select the FILL-IN Flash mode. Press the shutter release button. Note: The shutter speed is automatically set at 1/100-sec.
SELFTIMER Press the selftimer/ remote control button. is displayed on the LCD panel. Note: When the selftimer/remote control button is pressed again, will start blinking, but the selftimer will operate in the same manner as when lights. 30 Position the autofocus frame on the subject. Press the shutter release button halfway to focus on the subject. The focus and exposure will be locked.
Press the shutter release button fully to activate the selftimer. Notes: Use a tripod, etc., to hold the camera steady. The selftimer will be automatically canceled after the shot. To cancel the selftimer in the middle of operation, press the selftimer button again. The shutter will be released 12 seconds later. Important: To prevent backlight from entering through the viewfinder, do not move your eye from the viewfinder when you press the shutter release button.
MACRO PHOTOGRAPHY Close-up photography is possible at working distance of 0.6 m (2 ft) to , between focal lengths of 35 mm and 120 mm. Press the macro button. Note: When the lens is at a setting greater than 120 mm, it will be withdrawn to 120 mm automatically. 32 Make sure appears both in the viewfinder and on the LCD panel.
Press the zoom buttons to determine the composition. Note: To cancel the Macro mode, press the macro button again.
USING THE EXPOSURE MODES There are seven exposure modes: four with preset settings for easy shooting in various common situations, and three allowing you to select your own settings. Exposure Modes Program Auto (ESP metering) Standard exposure mode for ordinary shooting. MODE For creative expressions making good use of your experience: Aperture-Preferred Auto (center-weighted average metering) (P. 41) The aperture is set manually, and the camera automatically controls the correct shutter speed.
How to Select the Exposure Mode While pressing the mode button, select the mode using the shift buttons or shift dial. Make sure blinks to show the selected exposure mode. Release the mode button to engage the mode. Make sure The engaged exposure mode lights.
SPORTS To shoot fast-moving subjects. In this mode, the camera automatically selects both a faster shutter speed and the Continuous Shooting mode. This results in increased clarity, and lets you capture fast moving photo opportunities you might otherwise miss. Select the Sports mode to display on the LCD panel. As long as the shutter release button is pressed, the shutter will release continuously. Notes: In the Sports mode, for faster flash response, Auto-S pre-flashes will not be emitted.
PORTRAIT To take pictures with blurred backgrounds for a "portrait" effect. Portrait mode lets you take beautiful portrait photographs. This is especially effective when the lens is at the telephoto setting. Select the Portrait mode to display on the LCD panel. Press the shutter release button. Note: The aperture is wide open.
LANDSCAPE To take pictures with extended in-focus backgrounds. When shooting landscapes or landscapes with subjects in the foreground, both the nearest and farthest objects are sharply in focus. Select the Landscape mode to display on the LCD panel. Note: Set the lens at wide angle for optimal results. 38 Press the shutter release button.
NIGHT SCENE To shoot night scenes or night scenes with subjects in the foreground. In this mode, the camera automatically selects the ideal exposure compensation for shooting night scenes free of subjects, and for shooting night scenes with subjects in the foreground. Shooting Night Scenes Free of Subjects Select the Night Scene mode to display on the LCD panel. Press the shutter release button.
Shooting Night Scenes with Subjects in the Foreground (Slow-Synchro) Engage the Night Scene mode. Flip up the flash. Press the shutter release button. With Auto Flash Both the subject and background will be perfectly exposed. In the Auto Flash mode, only the subject in the foreground can be shot. Note: Since a slow shutter speed is automatically selected in low-light situations, the use of a tripod is recommended to prevent blurred pictures caused by shaking the camera.
APERTURE-PREFERRED AUTO A The background blur can be controlled by adjusting the aperture setting. The shutter speed will be selected automatically. Enter the Aperture-Preferred Auto mode. Press the shift buttons to adjust the aperture setting. Larger aperture F5.6 Note: If the shutter speed indicator blinks, adjust the aperture until the shutter speed lights steadily.
SHUTTER-PREFERRED AUTO S Subjects in motion can be captured by adjusting the shutter speed. The aperture will be controlled automatically. Enter the Shutter-Preferred S Auto mode. Turn the shift dial to adjust the shutter speed. Slower shutter speed 1/60-sec. Faster shutter speed Note: If the aperture indicator blinks, adjust the shutter speed until the aperture indicator lights steadily. 1/500-sec. When the shutter speed is set slower, fast-moving subjects will be blurred, showing motion.
MANUAL EXPOSURE M Both the shutter speed and aperture can be set as desired to reflect your photographic intentions. Press the shift button to Select the Manual adjust the aperture. Exposure mode to display M on the LCD panel. Note: Exposure compensation cannot be performed in the Manual Exposure mode.
Turn the shift dial to adjust the shutter speed. The exposure level will be displayed on the LCD panel and in the viewfinder.
FLASH PHOTOGRAPHY IN THE MANUAL EXPOSURE MODE Flip up the flash, and set the shutter speed to 1/100sec, or slower. Set the aperture setting according to the camera-to-subject distance in the table below, Aperture setting (color negative film) Standard Zoom Macro Distance ISO 50 0.6 ~ 0.8 ~ 1 ~ 0.8m 1m 1.2m 1.2 ~ 1.5 ~ 2 ~ 1.5m 2m 2.5m 2.5 ~ 3.2 ~ 3.2m 4m 2.0 ~ 2.6 ~ 3.3 ~ 3.9 ~ 4.9 ~ 6.6 ~ 8.2 ~ 10.5 ~ 2.6ft 3.3ft 3.9ft 4.9ft 6.6ft 8.2ft 10.5ft 13.1ft _ F22 F16 F13 F11 F6.7 F5.
EXPOSURE COMPENSATION The exposure compensation levels can be set up to ±4EV in 1/3EV steps. +2EV While pressing the +/button, set the desired compensation level using the shift buttons or shift dial. ±0EV Make sure The exposure level is displayed in the viewfinder and on the LCD panel. Note: While pressing the +/- button, the exposure counter changes to the compensation level display.
USING THE DRIVE MODES DRIVE There are two film-advance modes in addition to the standard single-frame advance mode. Selecting the Drive Mode Drive Modes Press the drive button. Display Function Single Standard single-frame advance mode Continuous Shooting The camera releases the shutter continuously while keeping moving subjects in focus and correctly exposed. (p. 49) Double Exposure You can combine two images on a single frame. (p.
While pressing the drive button, select the mode using the shift buttons or shift dial. Make sure is blinking on the left of the selected drive mode. 48 Release the drive button to engage the mode. Make sure disappears, and the engaged drive mode remains on the LCD panel.
CONTINUOUS SHOOTING CONT. The camera releases the shutter continuously while keeping moving subjects in focus and correctly exposed. While the shutter release Select the Continuous button is fully pressed, Shooting mode to display CONT. on the the shutter releases LCD panel. continuously. Notes: The camera exposes a maximum of approximately 2 frames per second. When used in combination with the flash, the flash may not fire after the second frame. The exposure will be adjusted automatically instead.
DOUBLE EXPOSURE D.EXP. You can expose two images on a single frame. Select the Double Exposure mode to display D.EXP. on the LCD panel. Press the shutter release button fully to take the first exposure. Make sure D.EXP. on the LCD panel will blink. The film will not be advanced.
Take the second exposure. The film will advance, and the Double Exposure mode will be canceled. Note: The Double Exposure mode cannot be canceled after the first shot (See p. 14).
Power Focus When the distance at which you want to shoot is predetermined, you can set the focus in advance and wait until the photo opportunity comes. Manual focusing is possible in this mode, so PF can also be used when autofocusing is difficult (see P. 70). When you want to wait until the photo opportunity comes, focus on the subject first by using autofocus. Then press the PF button. Note: Manual focusing is possible using the zoom buttons, but zooming cannot be performed in the PF mode.
SPOT METERING In this mode, the camera limits light metering to a particular area, such as a subject's face, and sets the correct exposure. Position the subject for spot metering within the spot frame, and press the SPOT button. Make sure will be displayed on the LCD panel and in the view/finder, and the exposure is locked. Recompose the shot, then press the shutter release button to take the picture.
ZOOM EXPOSURE Using this mode, the film is exposed while zooming, resulting in intriguing "streaked" images. Select the Night Scene mode to display on the LCD panel, Set the focal length where you want to start zooming. Notes: This exposure method is most effective when the focal length is set at either the maximum (180 mm) or the minimum (35 mm) setting. Use the flash when photographing a person.
AUTOFOCUS BEEP When not required, the beep can be overridden. While keeping the zoom button depressed, press the shutter release button fully to take the picture. Note: If the shutter speed is faster than 1/3-sec., zoom exposure will automatically be canceled, and the camera will operate in the standard Night Scene mode. Press the drive and flash buttons simultaneously to override the beep. To reactivate it, press the buttons again. When overriding or reactivating the beep, a confirmation beep is heard.
REMOTE CONTROL (OPTIONAL) The optional RC-100 Remote Control is required. Press the selftimer/remote control button to engage the Remote Control mode. Press 56 Display Position the autofocus frame on the subject. Shutter will be: Once Lights Released 3 sec. later Twice Blinks Released right away Thrice Goes out Canceled Note: When there is no subject in the position you want to focus on, first focus on an object at the same distance as the desired position.
Aim the remote control at the camera from within the range shown in the illustrations below, and press the button. The shutter will be released after the autofocus beep is heard and the AF illuminator blinks. When releasing the shutter from in front of the camera: Notes: Use selftimer outside this range. When the IS/L B-28 H.Q. CONVERTER 0.8X is mounted, the remote control may not work even within the above range because the signal transmission is blocked by the converter.
Viewfinder Cap Use the provided viewfinder cap to prevent light from entering the viewfinder. Notes on the Remote Control: The remote control may not work when there is backlighting and when autofocusing is difficult (see p. 70). Continuous shooting cannot be performed when the remote control is used. The shutter will not release using the remote control when the remote control's battery is exhausted. The battery of the remote control cannot be replaced. The service life is approx.
Bulb Select the Manual Exposure mode to display M on the LCD panel, and set the . shutter speed to Press the button on the remote control. The shutter will open. Note: The selftimer/remote control display remains on the LCD panel as long as the shutter is open.
Press the button on the remote control again. The shutter will close. Note: The shutter automatically closes when the camera's batteries are exhausted.
PRINTING THE DATE AND TIME There are five printing modes as shown below. Choose the desired mode with the DATE MODE button. Month mark Print mark Blinks for 3 seconds after the exposure to confirm that the data is imprinted. As the DATE MODE button is pressed, the mode will switch in the order shown below. Year-month-day Day-hour-minute No data Month-day-year Day-Month-year DATE MODE button: Switches the mode.
CORRECTING THE DATA Press the DATE MODE button to select the mode to be corrected. Choose the data to be changed by pressing the DATA SET button. Change the data with the DATE ADJUST button. Make sure The data to be corrected is blinking. After setting the data, press the DATE MODE button again. Make sure The print mark is displayed. Note: For fine-tuning of the built-in clock to the beginning of a specified minute, press the DATE ADJUST button when " : " is blinking.
FLASH at extremely close range tend to be overexposed, and the background too dark, because the narrowest aperture setting has been selected. Auto flash varies the amount of light emitted by the flash, is wasted because the light is spread over a wide area. If this wasted light is concentrated on the picture area, however, the working distance of the flash will be increased. Solving this problem is crucial to effective telephoto-flash photography.
The lower tube is designed for telephoto photography and offers GN 28 ~ 1.4 (ISO 100 ·m)/ GN 92 ~ 4.2 (ISO 100 ·ft). The upper tube is an intelligent variable-power flash offering GN20-1.4 (IS0100· m)/GN 66 ~ 4.2(ISO 100·ft). When the camera-to-subject distance is less than 1.2 m in the Macro mode, the upper flash will automatically fire to prevent the flash light from being obstructed by the tip of the lens. The flash is also capable of emitting minimal intensity for ideal macro photography.
Electronic Flash G40 (Optional) The G40 is a dedicated flash for the IS Series (GN 40, ISO 10Om/GN 132,ISO 100•ft). Refer to these pages when the G40 is to be used in the Shutter-Preferred Auto mode. When shooting in the Shutter-Preferred Auto mode: Turn the power switch ON, set the camera's exposure mode to S. Make sure The battery has been recharged. Select 1/100-sec. or slower shutter speed using the shift dial. Note: The G40 won't fire at shutter speeds faster than 1/100-sec.
Press the shutter release button. Note: When used together, the G40 fires full emission but the built-in flash is compensated by -3EV. Refer to the G40's manual for more instructions.
Advanced flash photography using the G40 Multi Flash Normal Slow-Synchro (Curtain-1 Synchro) Bounce photography uses indirect lighting of subjects by reflecting the flash off the ceiling or wall. With straight flash photography a strong shadow Bounce (with simultaneous use of the built-in flash) Follow-Synchro (Curtain-2 Synchro) often appears behind the subject. By bouncing the flash, you can obtain soft, wellbalanced lighting of the entire subject.
EFFECTS OF ZOOM AND ITS ADVANTAGES In a zoom lens, the focal length is changed by any focal length between 35 mm and 180 mm can More than 100 mm When the lens is set to the maximum focal length of 180 mm, magnification is approximately five times 35 mm wide-angle Because the angle of view is wide and the depth of photography. As the telephoto power is increased, the perspective narrows and the depth of field moving part of the lens. In the case of the IS-3DLX, be selected.
The five pictures below are samples taken using the zoom lens. Notice the dimensions of the subject as the camera zooms in. Be sure to hold the camera firmly or use a tripod, as pictures tend to blur more easily at longer focal lengths. Setting the shutter speed at 1/250-sec. or faster is recommended.
AUTOFOCUS (AF) Difficult Subjects for Autofocus to Lock Onto Although the IS-3DLX's autofocus can lock on virtually any subject, there are certain conditions, such as ~ shown below, where it may not be possible to obtain the correct focus. In the situations shown below in ~ , autofocus may not lock on the correct subject even though the autofocus indicator lights and the shutter releases.
Two subjects at different distances When the subject looks out-offocus although the autofocus lamp lights, use the power focus to manually focus on the subject. Subjects with repetitive patterns When the subject looks out-offocus although the autofocus lamp lights, use the power focus to manually focus on the subject. High-speed subjects at close range Focus on another subject at the desired camera-to-subject distance first.
EXPOSURE Automatic Exposure Mode Exposure refers to the amount of light which strikes the film, and is controlled by a combination of aperture size and shutter speed. The correct amount of light, called correct exposure, depends on the film speed (indicated on the film package, e.g. ISO 100 or ISO 200). The automatic exposure function automatically sets the correct exposure.
Portrait Mode In this mode, the IS-3DLX chooses a wide aperture for a short depth of field. This results in a softly blurred subject background, against which your subject stands out in sharp focus. Night Scene Mode When shooting night scenes you may sometimes this mode. To shoot such high-speed action, excellent timing is essential to take the photo at just the right moment. This mode offers the optimal combination of continuous shooting and autofocus to maximize your timing for maximum results.
METERING THE AMOUNT OF LIGHT Light Metering Light metering can measure the brightness of the framed picture in various ways. The IS-3DLX employs three metering systems: (1) ESP light metering , (2) center-weighted average light metering, and (3) spot metering. The IS-3DLX allows you to select the light metering system most suitable in any photographic situation. At the same time, the IS-3DLX uses TTL (throughthe-lens) light metering to automatically measure the light that enters the lens.
EXPOSURE COMPENSATION Fixed Proper Exposure FILM SPEED Film Speed Proper exposure refers to the balance of light and Film speed is indicated on the back of film dark in a photo. When shooting a black and white ratio of black and white — thus the overall exposure is set for gray. This is technically called packages. ISO 100, ISO 200, and ISO 400 are the most common. High-speed film (ISO 400), as implied by its name, is for taking photos of fastmoving subjects in action shots, for example.
MACRO PHOTOGRAPHY Zoom Macro The IS-3DLX's Macro mode enables you to shoot subjects as close as 0.6 m (2 ft) when the focal length is set from 35mm to 120mm. The autofocus and built-in flash can also be used with this function, which can fill the frame with an area of approx. 12 x 18 cm (4-3/4 x 7-1/16 in) at a working distance of 0.6m (2 ft) with the focal length set to 120mm. The picture area can be adjusted by changing the focal length and working distance.
PANORAMA PHOTOGRAPHY (OPTIONAL) By mounting the optional IS/L PANORAMA ADAPTER inside the camera, panorama pictures can be taken. Zoom in and out with the adapter mounted to obtain various compositions. When the optional IS/L LENS B-28 H.Q. CONVERTER 0.8X is used with the adapter, wide-angle panorama photography is possible, adding extension and depth to pictures. Picture area is shown with panorama marks as illustrated on the left.
ACCESSORIES (OPTIONAL) IS/L LENS B-300 H.Q. CONVERTER 1.7X IS/L LENS B-28 H.Q. CONVERTER 0.8X IS/L LENS B-MACRO H.Q.
CARE AND STORAGE CAUTIONS WARNING NEVER ATTEMPT TO DISASSEMBLE THE CAMERA; IT CONTAINS A HIGH-VOLTAGE CIRCUIT. CAMERA MAINTENANCE DO NOT EXPOSE THE CAMERA TO EXTREME HEAT (OVER 40°C/104°F) OR TO EXTREME COLD (BELOW -10°C/14°F). AVOID SUDDEN TEMPERATURE CHANGES AND HUMIDITY. DO NOT EXPOSE THE CAMERA TO STRONG MAGNETIC FIELDS. DO NOT APPLY EXCESSIVE FORCE TO THE CAMERA OR ITS CONTROLS. DO NOT TOUCH THE CONTACT POINTS INSIDE THE CAMERA. DO NOT USE ORGANIC SOLVENTS, THINNERS, OR BENZINE TO CLEAN THE CAMERA.
BATTERY HANDLING NOTES Do not mix different types of batteries or new and old batteries. When the camera is not used for an extended period of time, remove the batteries. Keep spare batteries on hand when going on a long trip or to a cold area. Sweat, oil, and so on can prevent a battery's terminals from making electrical contact. To avoid this, wipe both terminals before loading batteries. 80 WARNINGS NEVER TRY TO DISASSEMBLE, RECHARGE, OR SHORT CIRCUIT BATTERIES.
TROUBLESHOOTING Operating Problems Symptom The camera does not work. The displays turn off suddenly. The shutter speed and aperture setting blink. The subject cannot be focused on. Cause The power is OFF. The batteries are loaded incorrectly. The batteries are exhausted. The batteries are temporarily unable to function. The loaded film has been rewound. The film is incorrectly loaded. The LCD panel and viewfinder displays turn off after approx. 30 sec. (5 min.
Symptom The camera doesn't focus on the subject even though the AF illuminator lights. The shutter doesn't release even when the shutter release button is pressed. The flash doesn't fire Cause The autofocus may not work when the subject is out of the AF illuminator's working distance (approx. 1 .2 ~ 7 m/ 3.9 ~ 23 ft) or when the subject has low Remedy Use the power focus, or move the camera closer to the subject. See p.52/70 contrast (blue or black). The subject is not in focus.
Problems with Printed Pictures Symptom Cause The subjects' eyes This "red-eye phenomenon" occurs with appear red in printed pictures. all cameras when a flash is used. It is caused by light from the flash reflecting Remedy © Use the Auto-S Flash mode to significantly reduce red-eye phenomenon. See p.28 off the retina at the back of the eye. Redeye varies depending on the individual and the shooting conditions such as ambient lighting.
QUESTIONS AND ANSWERS Q: How long will the batteries last? A: Two new 3V lithium batteries will last for roughly 20 rolls of 24exposure film on which the flash was used on half of all the shots (determined under Olympus test conditions). If you do not use the flash and zoom very often, the batteries will last much longer. Q:How should I store the camera? A: Cameras are susceptible to damage caused by dust, moisture, and salt. Wipe and dry the camera thoroughly before storing it.
SPECIFICATIONS Type: Fully automatic 35mm autofocus single-lens reflex camera with built-in 35mm ~ 180mm zoom lens. Film format: 35mm standard DX-coded film (24 X 36mm) Lens: Olympus lens (filter available, 55mm filter diameter) 35mm ~ 180mm F4.5 ~ 5.6, 16 elements in 15 groups (5-group zoom construction) with extraordinary dispersion (ED) glass at third element in the first zoom lens group. Shutter: Electronic control system vertical focal plain shutter. Shutter speed 1/2000-sec. ~ 15-sec. bulb.
conditions), double exposure possible. Film rewind: Automatic film rewind (automatic rewind activated at end of film, automatic rewind stop). Rewind is possible at any point with rewind button. Selftimer: Electronic selftimer with 12-sec. delay. Remote control (optional): Infrared remote control unit, 3-sec/0-sec. delay switchable). Flash: Built-in IVP (Intelligent Variable-Power) flash system with dual light emitting tubes. Manual activating system, recycling time of about 5 sec. (at normal temperature).
OLYMPUS OPTICAL CO., LTD. San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan. Tel.03-3340-2211 OLYMPUS AMERICA INC. Crossways Park, Woodbury, New York 11797-2087, U.S.A. Tel. 516-364-3000 OLYMPUS OPTICAL CO. (EUROPA) GMBH. (Premises/Goods delivery) Wendenstrasse 14-16, 20097 Hamburg, Germany. Tel.040-237730 (Letters) Postfach 10 49 08, 20034 Hamburg, Germany. OLYMPUS OPTICAL CO. (UK.) LTD. 2-8 Honduras Street, London EC1Y 0TX, United Kingdom. Tel. 071-253-2772 0295.
