User Manual

IX2-RFAEVA-2
CONTENTS
This system employs a laser light source and should be assembled and adjusted by qualified
service personnel from Olympus.
Never attempt to assemble or adjust the system for it is extremely hazardous.
IMPORTANT – Be sure to read this section for safe use of the equipment. –
1-7
CAUTION
1 MODULE NOMENCLATURE
8
2 CONTROLS
9, 10
3
TOTAL INTERNAL REFLECTION FLUORESCENCE OBSERVATION
11- 14
3-1 Conditions of Observation...................................................................................................................................................... 11
3-2 Preparation for Observation ................................................................................................................................................ 12
1 Preparing for Laser Beam Introduction 2 Introducing the Laser Beam
3-3 Observation Procedure .............................................................................................................................................................. 13
1 Adjusting the Focus 2 Adjusting the Laser Beam Incidence Angle
4 REFLECTED LIGHT FLUORESCENCE OBSERVATION
15
5 USING THE CONTROLS
15, 16
6 TROUBLESHOOTING GUIDE
17
7 SPECIFICATIONS
18
PROPER SELECTION OF THE POWER SUPPLY CORD............................................................. 19, 20
1 Using the Binocular Tube Shutter 2 Using the Specimen Cover
3 Field Iris Aperture Diaphram 4 Filter Slider