Operation Manual

4
Trimming a file [Trimming]
81
EN
A file can be trimmed down to just the required portion and then re-saved.
LS-P2 model only
NOTE
• Only PCM-format file recorded on the
voice recorder can be trimmed.
1
Before performing the file
trimming operation, first
select the file you want to trim
(☞P.22).
2
Press the
MENU / SCENE button
while the voice recorder is in stop
mode.
3
Press the `
OK button to move
the cursor into the list of setting
items.
4
Press the
+ or – button to select
[ Trimming ].
5
Press the `
OK button.
6
Press the `
OK button to play the
file to the desired trimming point
(☞P.36).
• You can change the playback speed
(☞ P. 41), and fast-forward/rewind
(☞ P. 37).
7
Press the F2 button at the
position where you want to start
trimming.
TIP
• Playback continues while [Start]
position is set and as with usual
playback, changing the playback
speed and fast-forward/rewind can
be performed and you can quickly
advance to the [End] position.
• When the end of the file is reached
while the [End] position is not set,
that position becomes the end
position of trimming.
• Writing an index mark/temp mark
at the start point and end point
beforehand is handy (☞P.45).
8
Press the F2 button again at the
position where you want to end
trimming.
Trimming a file [Trimming]