Operation Manual

13EN
4
As in Steps 2 and 3, use 1234
and the  button to set [M](month),
[D](day), and [TIME](hours and
minutes).
For precise time setting, press the  button
as the time signal strikes 00 seconds.
To change the date and time, adjust the setting
from the menu. [X](Date/time) (p. 46)
To check the date and time
Press the g button while the camera is
turned off. The current time and alarm time are
displayed for approx. 3 seconds.
Setting the date and time
The date and time set here are used to image fi le
names, date prints, and other data.
1
Press the o button to turn on
the camera.
The date and time setting screen is displayed when
the date and time are not set.
X
YM
YMD
D TIME
---- -- -- -- --
MENU
CANCEL
Date and time setting screen
2
Use 12 to select the year for [Y].
2008
-- -- -- --
X
YM
YMD
D TIME
MENU
CANCEL
3
Press the 4 button to save the setting
for [Y].
2008 ---- -- --
X
YM
YMD
DTIME
MENU
CANCEL
●
book_myu1060SW_en_A.indb 13book_myu1060SW_en_A.indb 13 2008/07/01 20:46:292008/07/01 20:46:29