Operation Manual

46 EN
Adjusting the brightness of the monitor
[s]
x SETUP  s
To adjust the monitor brightness
1 Use 12 to adjust the brightness while
viewing the screen, and then press the 
button.
s
SET
OK
MENU
BACK
Setting the date and time [X]
x SETUP  X
“Setting the date and time” (p. 13)
To select the date and time display order
1 Press 4 after setting Minute, and use 12
to select the date display order.
X
YM
YMD
D TIME
MENU
CANCEL
2008 10 26 12 30
Date order
Setting the date and time for another
time zone [DUALTIME]
x SETUP  DUALTIME
When [DUALTIME] is set to [ON], the date and
time set here are used in image fi le names,
dated prints and other data.
Submenu
2
Submenu
3
Application
OFF —
Switches to the date and time
set in [X].
ON
(Proceeds
to the
setting
screen
*1
.)
The date and time settings
from [DUALTIME] are used in
fi le names, dated prints and
other data.
*1
The setting procedure is identical to that in “Setting
the date and time” (p. 13).
The date display order is the same as that set
with [X].
book_myu1060SW_en_A.indb 46book_myu1060SW_en_A.indb 46 2008/07/01 20:46:582008/07/01 20:46:58