Operation Manual

Table Of Contents

Preparation

Power on

Rotate the ON/OFF switch to the ON position.

• When the camera is turned on, the monitor will turn on.

• To turn the camera off, return the switch to the OFF position.

 ON/OFF switch

250250 F5.6

01:02:0301:02:03

3838

ISO-A

200

Wi-Fi

 Monitor

Battery level

; (green): Camera ready to shoot.

(Displayed for about ten

seconds after the camera is

turned on.)

: (green): Low battery

] (blinks red): Charge the battery.

Camera sleep operation

If no operations are performed for a minute, the camera enters “sleep” (stand-by) mode to

turn off the monitor and to cancel all actions. The camera activates again when you touch

any button (the shutter button, q button, etc.). The camera will turn off automatically if

left in sleep mode for 4 hours. Turn the camera on again before use.