Operation Manual

43 EN
Shooting
2
1
Rotate the creative dial to ART.
• A menu of art fi lters will be displayed. Select a fi lter
using the rear dial.
• Use FG to choose an effect. The effects available
vary with the selected fi lter (soft focus, pin-hole, frames,
white edges, starlight, fi lter, tone, blur, or shade effect).
• Press Q or press the shutter button halfway to select
the highlighted item and exit the art fi lter menu.
Vintage Ⅱ
ART
13
ART
13
2
Shoot.
• To choose a different setting, use the lever to display the art fi lter menu.
• To maximize the benefi ts of the art fi lters, some of the shooting function settings are
disabled.
• If [RAW] is currently selected for image quality, image quality will automatically be set to
[YN+RAW]. The art fi lter will be applied to the JPEG copy only.
• Depending on the subject, tone transitions may be ragged, the effect may be less
noticeable, or the image may become more “grainy.”
• Some effects may not be visible in live view or during movie recording.
• Playback may differ according to the fi lters, effects, or movie quality settings applied.
• When the art fi lter is displayed, the lever can be used to view
the Highlight & Shadow Control (P. 44).
RESETRESET
Midtone
HighLight+2HighLight+2
Shadow+2Shadow+2
• Pictures taken using [HDR], [Multiple Exposure], [Keystone Comp.], or [High Res Shot]
are recorded at the [Natural] setting.
• The fi lter type (I, II, or III) and effect for movies and photo stories (layouts) can be chosen
using the [Picture Mode] option in W Shooting Menu 1.
Setting and taking partial color images
You can create images that extract only the colors that you
selected using the color ring.
Rotate the front dial (r) to select a color. Rotate the rear dial
(o) to return to the fi lter menu. The effects will be displayed in
live view.
To choose a new color after shooting, slide the lever to return to
the color selection display.
Partial Color Ⅰ
ColorColor