Operation Manual

63
EN
Shooting
2
Flash modes that can be set by shooting mode
Shooting
mode
LV super
control
panel
Flash mode
Flash
timing
Conditions for
ring the ash
Shutter
speed limit
P/A
#AUTO
Auto ash
1st
curtain
Fires automatically
in dark/backlit
conditions
1/30 sec. –
1/250 sec.*
!
Auto ash
(red-eye reduction)
#
Fill-in ash Always res
30 sec. –
1/250 sec.*
$
Flash off
kk k
!
SLOW
Slow synchronization
(red-eye reduction)
1st
curtain
Fires automatically
in dark/backlit
conditions
60 sec. –
1/250 sec.*
#SLOW
Slow synchronization
(1st curtain)
#
SLOW2
Slow synchronization
(2nd curtain)
2nd
curtain
S/M
#
Fill-in ash
1st
curtain
Always res
60 sec. –
1/250 sec.*
#!
Fill-in ash
(red-eye reduction)
$
Flash off
kk k
#
2nd-C
Fill-in ash/Slow
synchronization
(2nd curtain)
2nd
curtain
Always res
60 sec. –
1/250 sec.*
#AUTO, $ can be set in A mode.
* 1/250 seconds when using a separately sold external ash.
Minimum range
The lens may cast shadows over
objects close to the camera,
causing vignetting, or be too
bright even at minimum output.
Lens
Approximate distance at
which vignetting occurs
ED 12mm F2.0 0.2m
ED 14-42mm F3.5-5.6 EZ 0.5m
ED 17mm F1.8 0.2m
ED 14-150mm F4.0-5.6 II 0.5m
• External ash units can be used to prevent vignetting. To prevent photographs from being
overexposed, select mode A or M and choose a high f-number, or reduce ISO sensitivity.
Adjusting ash output ( ash intensity control)
Flash output can be adjusted if you nd that your subject to appears overexposed, or is
underexposed even though the exposure in the rest of the frame is just right.
1
Press the Q button to display the LV super control
panel.
2
Tap ash intensity control.
3
Select a ash compensation value using the front
dial.
250250 F5.6
P
i
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
01:02:0301:02:03
10231023
AEL/AFL
U
Flash intensity control
This setting has no effect when the ash control mode for the external ash unit is set to
MANUAL.
• Changes to ash intensity made with the external ash unit are added to those made with
the camera.