Operation Manual

EN 13
En
Open the Case
1 Slide and hold the slide lock towards the arrow direction (1) and turn the open/close dial clockwise
(2).
2 Open the rear lid of the Case gently.
Attach the flash to the camera and raise the light emitting part
Attach the flash supplied with the camera.
Make sure to raise the light emitting part.
CAUTION:
Do not apply too much force while turning the open/close dial. Doing so may damage the dial.
1
2
Slide lock
PT-EP05L_06L_EN.Book Page 13 Friday, July 15, 2011 10:30 AM