Manualshelf

Installation Instructions

ManualsBrandsOlympus ManualsFlag Poles & Accessories3' x 5' Deluxe American Flag with Aluminum Flagpole Kit
1
©Olympus Group 2019. All rights reserved.
RKUSA6A2 6 ft. Deluxe Flag Set Installation Instructions
Mount Flag holder bracket on vertical or horizontal surface with the screws included in
your set. If mounting to brick or masonry, pre-drill holes, insert molly/achor plugs in
holes and be sure screws are as tight as possible.
Assemble pole by sliding the two sections together to make pole.
Attach flag by sliding anti-furl rings on to pole (older models may have two; new model
has one).
● Position BOTTOM ring/collar so that flag clip is at top.
● Lay out flag next to pole to determine where bottom anti-furl ring will be placed.
● Top ring is connected to ball ornament (newer models)
● Open flag clip and insert into each flag grommet.
● Leave a little slack in the flag header between top and bottom rings. If flag is
stretched too tight, flag will not unfurl properly. Each flag is individually sewn,
and slight adjustments may have to be made to location of bottom flag ring.

Summary of content (1 pages)