Installation Instructions

54
4.2 Inspection workflow
SC-1 INSTRUCTION MANUAL
Ch.4
4.2 Inspection workflow
1
Check if the cradle is properly mounted on the system
control arm.
Section 4.3 on page 55
2
Check that the tablet is docked correctly in the cradle.
Section 4.4 on page 55
3
Power on.
Section 4.5 on page 55
4
Check the battery level and power supply.
Section 4.6 on page 56
5
Set the tablet to sleep mode.
(if not used for a while after checking)
Section 4.7 on page 57