Installation Instructions

76
7.2 Replacing the battery pack
SC-1 INSTRUCTION MANUAL
Ch.7
7.2 Replacing the battery pack
1 Prepare a Phillips-head screwdriver that fits the screw.
2 Shut down the tablet following Section 5.5, “Power off” and remove it from the cradle.
3 If the AC adapter is connected to the tablet, remove it.
4 Loosen the 10 screws which secure the battery
cover, then open the battery cover.
Figure 7.1
CAUTION
If any screw for the battery cover is missing, due to any damage, contact Olympus.
NOTE
Do not remove those 10 screws from the battery cover.
5 Remove the 2 screws that secure the battery
cover.
Figure 7.2
NOTE
Use the replacement screws packaged with the new battery pack.