Installation Instructions

78
7.2 Replacing the battery pack
SC-1 INSTRUCTION MANUAL
Ch.7
9 Secure the battery pack with the 2 replacement
screws packaged with the battery pack.
Figure 7.6
10 Fit the battery cover in the order of 1 to 10,
fasten the screws halfway, then fasten screws
completely.
Figure 7.7
NOTE
• To ensure the battery cover is properly attached with maximum water-tightness,
always secure the screws in the order from 1 to 10.
• Make sure that no foreign object is stuck under the battery cover. Otherwise gap
will be found and watertightness will not be assured.
11 Dock the tablet in the cradle following Section 3.5, “Docking the tablet” to check
whether charging is possible or not.
1
5
10
9 7
3
4
2
8 6