User Manual

33
EN
Viewing the image immediately
Viewing the image immediately
after shooting
after shooting
z
z
[Rec View]
[Rec View]
Submenu 2 Application
Off
The image being recorded is
not displayed. This allows the
user to prepare for the next shot
while following the subject in the
monitor after shooting.
On
The image being recorded is
displayed. This allows the user to
make a brief check of the image
that was just taken.
Automatically rotating images
Automatically rotating images
shot with the camera in a vertical
shot with the camera in a vertical
position during playback
position during playback
z
z
[Pic Orientation]
[Pic Orientation]
● During shooting, the [y] (p. 38) setting on the
playback menu is set automatically.
● This function may not work properly if the camera
is facing up or down during shooting.
Submenu 2 Application
Off
Information about the vertical/
horizontal orientation of the
camera during shooting is not
recorded with images. Images
shot with the camera in a vertical
position are not rotated during
playback.
On
Information about the vertical/
horizontal orientation of the
camera during shooting is
recorded with images. Images
are automatically rotated during
playback.
Displaying icon guides
Displaying icon guides
z
z
[Icon Guide]
[Icon Guide]
Submenu 2 Application
Off No icon guide is displayed.
On
The explanation of the selected
icon will be displayed when a
shooting mode or function menu
icon is selected (position the
cursor on the icon for a while to
display the explanation).
Icon guide
MENUMENU
0.00.0
16 M
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
PP
Program Auto
Functions can be
changed manually.
4:3
Imprinting the date of recording
Imprinting the date of recording
z
z
[Date Stamp]
[Date Stamp]
Submenu 2 Application
Off Do not imprint the date.
On
Stamp new photographs with the
date of recording.
● When the date and time are not set, [Date Stamp]
cannot be set. “Turning on the camera and making
the initial settings” (p. 7)
● The date stamp can not be deleted.
● When drive settings are set to other than [o],
[Date Stamp] cannot be set.